MANUAL - FLASH-COLOR-STROBE
3
112-CHANNEL MODE
CH1
0-255
RGB1 RED (0-100%)
CH2
0-255
RGB1 GREEN (0-100%)
CH3
0-255
RGB1 BLUE (0-100%)
CH4
0-255
RGB2 RED (0-100%)
CH5
0-255
RGB2 GREEN (0-100%)
CH6
0-255
RGB2 BLUE (0-100%)
,,,
,,,
,,
CH94
0-255
RGB32 RED (0-100%)
CH95
0-255
RGB32 GREEN (0-100%)
CH96
0-255
RGB32 BLUE (0-100%)
CH97
0-255
W1 (0-100%)
,,,
,,,
,,,
CH112
0-255
W16 (0-100%)
INSTRUCTIONS FOR USE
WARNINGS
CAUTION
DO NOT OPEN THE HOUSING
SHOCK HAZARD
EXPLANATION OF SIGNS
The triangle containing a lightning symbol is used to indicate whenever your health is at risk (due to
electrocution, for example).
An exclamation mark in a triangle indicates particular risks in handling or operating the appliance.
Accordance with the requirements of UK standard
Class I protection with earth connection
The product is for indoor use only
Minimum distance between the device and other objects
Do not stare into the light source
This marking indicates that this product should not be disposed with other household wastes throughout
the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material resources. To return your used device,
please use the return and collection systems or contact the retailer where the product was purchased. They can
take this product for environmental safe recycling.
SAFETY RECOMMENDATIONS
•
Please read the instructions carefully. They contain important information about the installation, operation and
maintenance.
•
Keep this User Manual for future reference. If you sell the unit to another user, be sure that he also receives this
instruction booklet.
•
Unpack and check the unit carefully that it has not been damaged during transport before using the unit.
•
Before operating, ensure that the voltage and frequency of power supply match the power requirements of the
unit.
•
The unit is for indoor use only in a dry location.
•
It is essential that the unit is earthed. Only connect to a wall outlet with earth connection.
• The unit must be installed in a location with adequate ventilation, at least 1m from adjacent surfaces. Be sure
that no ventilation slots are blocked.
