1. BEFORE YOU BEGIN
Contents of the carton:
•
1 x LMH360LED
•
1x Mains lead
•
1x
User Manual
Unpacking Instructions
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are
present and have been received in good condition. Notify the freight company immediately and retain packing
material for inspection if any parts appear to be damaged from shipping or the carton itself shows signs of
mishandling. Keep the carton and all packing materials. In the event that a fixture must be returned to the factory, it
is important that the fixture be returned in the original factory box and packing.
Safety Instructions
Please read these instructions carefully, they include important information about the installation, usage and
maintenance of this product.
• Please keep this User Guide for future
reference. If you sell the unit to another user, be sure that he also receives
this instruction booklet.
• Always make sure that you are connecting t
o the proper voltage, and that the line voltage you are connecting to is
not higher than that stated on the decal or rear panel of the fixture.
• This product is intended for indoor use only!
• T
o prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable
materials close to the unit while operating.
• The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from adjacent surfaces. Be
sure that no ventilation slots are blocked.
• Al
ways disconnect from power source before servicing or replacing fuse and be sure to replace with same fuse size
and type.
• Secure fixture t
o fastening devic
e using a safety chain. Never carry the fixture solely by its head. Use its carrying
handles.
• Max
imum ambient temperature (Ta) is 104° F (40°C). Do not operate the fixture at temperatures higher than this.
•
In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by
yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest
authorized technical assistance center. Always use the same type of spare parts.
•
Don’t connect the device to a dimmer pack.
•
Make sure the power cord is never crimped or damaged.
•
Never disconnect the power cord by pulling or tugging on the cord.
• A
void direct eye exposure to the light source while it is on.
.
DISCONNECT DEVICE: Where the MAINS plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
Specifications
Voltage: ................................................................................................................. 220-240V
∼
50/60
Hz
Fuse: ...............................................................................................................................
3A 250V
Power consumption: ....................................................................................................................................... 110W
GB
©Copyright LOTRONIC 2014
LMH360LED
Page 3
