©Lotronic – 2014
www.ibizalight.com
L
L
E
E
D
D
P
P
A
A
R
R
6
6
4
4
C
C
A
A
N
N
LP64LED-PROMO
INSTRUCTION MANUAL
Thank you for purchasing the LP64LED-PROMO. Every LED PAR-64 has been
well tested and shipped in perfect operating condition.
Safety Instructions
Please read these instructions carefully, they include important information
about the installation, usage and maintenance of this product.
• Please keep this User Guide for future reference. If you sell the unit to
another user, be sure that he also receives this instruction booklet.
• Always make sure that you are connecting to the proper voltage,
and that the
line voltage you are connecting to is not higher than that stated on the bottom
of the fixture.
• This product is intended for indoor use only!
• To prevent risk of fire or shock, do not expose fixture to rain or moisture.
Make sure there are no flammable materials close to the unit while operating.
• The unit must be installed in a location with adequate ventilation, at least
20in (50cm) from adjacent surfaces. Be sure that no ventilation slots are
blocked.
• Always disconnect from power sourc
e before servicing or replacing fuse and
be sure to replace with same fuse size and type.
• Maximum ambient temperature (Ta) is 104° F (40°C). Do not operate the
fixture at temperatures higher than this.
• In the event of a serious operating problem, stop
using the unit immediately.
Never try to repair the unit by yourself. Repairs carried out by unskilled people
can lead to damage or malfunction. Please contact the nearest authorized
technical assistance center. Always use the same type of spare parts.
•
Don’t connect the device to a dimmer pack.
• Make sure the power cord is never crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
• Avoid direct eye exposure to the light source while it is on.
GB
