Help is available to guide you through manual installation in these
environments. (“Help Files” on page 1-6 describes how to access
help information.)
Kit Contents
| Along with this manual, the adapter kits contain:
¹
The IBM 10/100 EtherJet PCI Adapter or the 10/100 EtherJet
PCI Adapter with Wake on LAN
|
¹
2 Drivers and Installation diskettes
¹
Caution: Safety Information—Read This First booklet
| In addition to the items listed here, the 10/100 EtherJet PCI Adapter
| with Wake on LAN kit also includes two Wake on LAN cables.
|
¹
One 08L2558 cable for using with a PC system that has
|
separate Wake on LAN power source and Wake on LAN signal
|
source connectors
|
¹
One 08L2559 cable for using with a PC system that has the
|
combined 3-pin Wake on LAN connector
If any item is missing or damaged, contact your place of purchase.
Adapter Installation Checklist
To install either adapter, complete the following steps in order. You
might want to mark this page for easy retrieval or make a copy to
use for reference.
1. Preparation
Check the kit contents list on page 1-5.
In addition to the publications shipped with the adapter, you
will need:
¹
The manual provided with your PC
¹
The manual provided with your network operating system
or network application
¹
Your operating system and network application software
Chapter 1. Introducing the Adapters
1-5
Title: ASB3CNTL CreationDate: 07/16/98 18:07:52
