DANGER
Electrical voltage and current from power, telephone, and communication cables are hazardous.
To avoid a shock hazard:
v
Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration
of this product during an electrical storm.
v
Connect all power cords to a properly wired and grounded electrical outlet. Ensure outlet
supplies proper voltage and phase rotation according to the system rating plate.
v
Connect any equipment that will be attached to this product to properly wired outlets.
v
When possible, use one hand only to connect or disconnect signal cables.
v
Never turn on any equipment when there is evidence of fire, water, or structural damage.
v
Disconnect the attached power cords, telecommunications systems, networks, and modems before
you open the device covers, unless instructed otherwise in the installation and configuration
procedures.
v
Connect and disconnect cables as described below when installing, moving, or opening covers on
this product or attached devices.
To Disconnect:
1.
Turn everything OFF (unless instructed otherwise).
2.
Remove power cords from the outlet.
3.
Remove the signal cables from connectors.
4.
Remove all cables from devices.
To Connect:
1.
Turn everything OFF (unless instructed otherwise).
2.
Attach all cables to devices.
3.
Attach signal cables to connectors.
4.
Attach the power cords to outlets.
5.
Turn device ON.
(D005)
CAUTION:
or
>18 kg (39.7 lb)
or
18-32 kg (39.7-70.5 lb)
The weight of this part or unit is between 18 and 32 kg (39.7 and 70.5 lb). It takes two persons to
safely lift this part or unit. (C009)
2
