4. Select
Drivers
and then
Add Adapter....
5. Select
Unlisted or updated network adapter
and then
OK
6. Enter
x:\wfw
, where
x
is your drive letter. Select
OK
.
7. Select
CLOSE
.
8. Select
OK
.
9. You will be prompted to reinstall specific network-related files. Reinstall them
as needed.
10. You will also be prompted to insert the Windows for Workgroups program
application diskettes or CD-ROM. Follow the instructions.
11. Select
OK
for any messages regarding updates to the SYSTEM.INI and
PROTOCOL.INI files.
12. When prompted to restart your computer, select
RESTART COMPUTER
.
Windows for Workgroups will automatically restart your computer and the
driver will be loaded.
13. At system startup, check for the following conditions to determine whether you
have successfully installed the adapter:
v
The device driver files loaded successfully. There are no error messages.
v
The adapter LEDs indicate normal operation. See “Understanding the
adapter LEDs and labels” on page 43.
v
You are able to log on and communicate with the network.
If you experience problems, see “Chapter 4. Problem solving” on page 37.
Managed Driver Upgrade for Windows 95, Windows 98, Windows NT,
and Windows 2000
Managed Driver Upgrade is a package you can download from the IBM Token-Ring
PCI Family Adapter Web site that assists local users and system administrators in
upgrading their systems to the latest level of the driver. The package consists of the
new driver, all necessary support files, and an executable program that can upgrade
the driver without any user intervention.
Managed Driver Upgrade can be run locally by the user, or remotely by a system
administrator using management software such as Tivoli TME
®
10 Software
Distribution.
Running Managed Driver Upgrade locally
To run the Managed Driver Upgrade locally, perform the following procedure.
1. Download the correct package. There are packages for Windows 95, Windows
98, Windows NT 4.0, and Windows 2000.
2. Run the package and extract all the files to a single directory such as c:\temp.
3. If you are using Windows NT 4.0, log in using a user ID with administrator
privileges.
4. Open a DOS or command window.
5. Run the Managed Driver Upgrade executable. The name of the executable is
TRMDU95.EXE for Windows 95, TRMDU98.EXE for Windows 98,
TRMDU00.EXE for Windows 2000, and TRMDUNT.EXE for Windows NT 4.0.
6. Enter the following command line options as needed. Refer to the following
table.
34
IBM 16/4 Token-Ring PCI Management Adapter
Summary of Contents for 16/4 Token-Ring
