1.
Review
the
safety
information
that
begins
on
page
v
and
“Installation
guidelines”
on
page
19.
2.
Turn
off
the
server
and
attached
devices;
then,
disconnect
all
power
cords
and
external
cables.
3.
Remove
the
side
cover
(see
“Removing
the
side
cover”
on
page
22).
4.
Disconnect
the
power
cord
from
the
power
supply
that
is
to
be
removed.
5.
Press
down
on
the
orange
release
lever
and
pull
the
power
supply
out
of
the
bay,
using
the
handle.
6.
If
you
are
instructed
to
return
the
hot-swap
power
supply,
follow
all
packaging
instructions,
and
use
any
packaging
materials
for
shipping
that
are
supplied
to
you.
7.
Touch
the
static-protective
package
that
contains
the
hot-swap
power
supply
to
any
unpainted
metal
surface
on
the
server;
then,
remove
the
power
supply
from
the
package
and
place
it
on
a
static-protective
surface.
8.
Place
the
power
supply
into
the
bay
guides.
9.
Press
down
on
the
orange
release
lever
and
push
the
power
supply
toward
the
front
of
the
chassis
until
it
locks
into
place.
10.
Connect
one
end
of
the
power
cord
into
the
connector
on
the
back
of
the
power
supply
and
connect
the
other
end
of
the
power
cord
into
a
properly
grounded
electrical
outlet.
11.
Make
sure
that
both
the
ac
and
dc
power
LEDs
on
the
rear
of
the
power
supply
are
lit,
indicating
that
the
power
supply
is
operating
correctly.
12.
Install
the
side
cover
(see
“Reinstalling
the
side
cover”
on
page
46).
13.
Connect
the
external
cables
and
power
cords.
If
you
have
other
options
to
install
or
remove,
do
so
now;
otherwise
go
to
“Completing
the
installation”
on
page
44.
42
xSeries
206m
Types
8485
and
8490:
User’s
Guide
