background image

IBM 2200VA LCD 2U Rack Uninterruptible Power Supply for IBM System x

20

This document was created or updated on August 16, 2010.

Send us your comments in one of the following ways:

Use the online 

Contact us 

review form found at:

ibm.com

/redbooks

Send your comments in an e-mail to:

redbook@us.ibm.com

Mail your comments to:

IBM Corporation, International Technical Support Organization
Dept. HYTD Mail Station P099
2455 South Road
Poughkeepsie, NY 12601-5400 U.S.A.

This document is available online at 

http://www.ibm.com/redbooks/abstracts/tips0781.html

 .

Trademarks

IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of International Business 

Machines Corporation in the United States, other countries, or both. These and other IBM trademarked 
terms are US registered or common law trademarks owned by IBM at the time this information was 
published. Such trademarks may also be registered or common law trademarks in other countries. A 
current list of IBM trademarks is available on the Web at http://www.ibm.com/legal/copytrade.shtml

The following terms are trademarks of the International Business Machines Corporation in the United 

States, other countries, or both: 

IBM Systems Director Active Energy Manager™
IBM®
Redbooks (logo)®
System x®

Other company, product, or service names may be trademarks or service marks of others. 

Summary of Contents for 2200VA LCD 2U





















Reviews: