Customizing the TrackPoint
Using the Press-to-Select Window
Note:
To use the Press-to-Select function, you must disconnect any
PS/2 mouse and enable the TrackPoint.
If you enable Press-to-Select by putting a check mark in the Enable
Press-to-Select box, you can make the TrackPoint stick function the
same as the left or right click button on the keyboard.
Click one of the Press means radio buttons to select which
button the stick will simulate: either the left or the right button.
For example, if you select Left Click, you can start a program
with the TrackPoint by putting the pointer on the program's icon
and applying light pressure on the stick.
To adjust the pressing timing of the stick, set Click Pace.
Note:
If you set the pace too slow, you might notice unintended
clicks, a pointer delay, or a dragging delay. However, if
you set the pace too fast, you might find Press-to-Select
hard to use.
Extending the Features of Your Computer
51
