The algorithm that generates the number is designed to provide unique IDs until
the year A.D. 3400. No two computers in the world have the same number.
When you replace the system board, you must set the UUID on the new system
board as follows:
1.
Install the ThinkPad Hardware Maintenance Diskette Version 1.73 or later, and
restart the computer.
2.
From the main menu, select
4. Assign UUID
.
A new UUID is created and written. If a valid UUID already exists, it is not
overwritten.
Reading or writing the ECA information
Information on Engineering Change Announcements (ECA) are stored in the
EEPROM of the system board. The electronic storage of this information simplifies
the procedure to check if the ECA has been previously applied to a machine. The
machine does not need to be disassembled to check for the ECA application.
To check what ECAs have been previously applied to the machine, use the ECA
Information Read/Write function on the ThinkPad Hardware Maintenance Diskette
Version 1.73 or later.
1.
Insert the ThinkPad Hardware Maintenance Diskette Version 1.73 or later, and
restart the computer.
2.
From the main menu, select
6. Set ECA Information
.
3.
To read ECA information, select
2. Read ECA/rework number from EEPROM
and follow the instruction.
4.
To read box build date, select
5. Read box build date from EEPROM
, and
follow the instruction on the screen.
After an ECA has been applied to the machine, the EEPROM must be updated to
reflect the ECA’s application. Use the ThinkPad Hardware Maintenance Diskette
Version 1.73 or later to update the EEPROM.
Note:
Only the ECA number is stored in the EEPROM. The machine type of the
ECA is assumed be the same as the machine type of the machine that had the ECA
applied to it.
1.
Insert the ThinkPad Hardware Maintenance Diskette Version 1.73 or later, and
restart the computer.
2.
From the main menu, select
6. Set ECA Information
.
3.
To write ECA information, select
1. Write ECA/rework number from EEPROM
,
and follow the instruction.
4.
To write box build date, select
4. Write box build date from EEPROM
, and
follow the instruction on the screen.
If the system board is being replaced, try to read the ECA information from the old
system board and transfer the information to the new system. If the system board
is inoperable, this will not be possible.
FRU replacement notices
81
Summary of Contents for 2714 - ThinkPad R500 - Core 2 Duo T6670
