5
Web interface
You can use Internet Explorer 5.0 (and higher) or Netscape
®
4.0.8 (and higher) browsers to configure Embedded Network
Module options, or to view the Event log.
1. Address the Embedded Network Module by its IP address or DNS name (if configured).
2. Enter
the
User Name
and
Password
(
apc
by default).
P
OWER
C
HUTE
N
ETWORK
S
HUTDOWN
The PowerChute Network Shutdown utility that is included on the
Embedded Network Module CD
can provide reliable, grace-
ful, unattended shutdown for multiple servers protected by the UPS in the event of an extended power outage. It works by
communicating directly over the network to the Embedded Network Module CD. To install PowerChute Network Shutdown,
see the installation guide in the PCNS directory on the
Embedded Network Module CD
.
4: O
PTION
B: U
TILIZATION OF
S
ERIAL OR
USB C
ONNECTION VIA
PCBE S
OFTWARE
PCBE has three components: PCBE Server, PCBE Agent, and PCBE Console. At least one copy of each component must be
installed if you want to use PCBE to manage a UPS.
•
The PCBE Agent communicates with the UPS and with the PCBE Server.
•
The PCBE Server can monitor up to five UPS systems through their PCBE Agents.
•
The PCBE Console allows you to log in to any PCBE Server to manage that server’s UPS systems.
You can install all three components on the same computer, or on different computers on your network; the PCBE Agent, how-
ever, must be installed on a computer that uses the serial cable that came with the UPS to connect to that UPS.
Do the following at each computer on which you want to install a PCBE component:
1. Insert the Installation CD.
2. When the initial screen appears, click ‘Getting Started Guide’ to access an overview of the PCBE components
and installation procedures.
3. After reviewing the “Getting Started Guide,” click ‘Install Product’ on the initial screen.
4. When the “Product Installation” screen appears, click ‘Release Notes’ and review the available PCBE notes.
5. Click ‘Install’ for the PCBE component you want to install, and follow the on-screen instructions.
6. Repeat step 5 to install any other PCBE component.
7. When done installing the PCBE components, reboot the computer.
After you have installed your PCBE components, use a PCBE Console to log on to any PCBE Server and use the ‘Context
Help’ or ‘Help Contents’ options in the ‘Help’ menu to review the Online Help.
A
DDING
PCBE A
GENTS TO A
PCBE S
ERVER
’
S
D
EVICE
L
IST
During the installation of a PCBE Server, you can select up to five PCBE Agents for that server to monitor:
•
The PCBE Agents must already be installed.
•
The PCBE Agents must use the same password and user name as the PCBE Server.
If you install any PCBE Agents after you install your PCBE Servers, you can add those agents to the device list of any PCBE
Server that uses the same password and user name as those agents, as follows:
1. Use a PCBE Console to log on to the PCBE Server.
2. Select ‘Configure Device List…’ from the ‘Tools’ menu.
3. Highlight a PCBE Agent that you want to add in the ‘Discovered Devices’ list and click ‘Add.’
4. Repeat step 3 for each PCBE Agent you want to add.
5. Click ‘Apply’ to add the PCBE Agents to the server’s device list.
©
Copyright International Business Machines Corporation, 2002. All rights reserved.
Note to U.S. Government Users – Documentation related to restricted rights – Use, duplication or disclosure is subject to restrictions set forth
in GSA ADP Schedule Contract with IBM Corp.
IBM is trademark of International Business Machines Corporation in the United States, other countries, or both.
APC and PowerChute are registered trademarks of American Power Conversion Corporation. Other company, product, or service names may
be the trademarks or service marks of others.
