© Copyright IBM Corporation 2019, 2020, 2021. Customer Install Guide, 2U Chassis
19
Location in the Rack
The base IBM Cloud Pak for Data System consists of four main components (1G
switch, 25G switch, two compute chassis) that are designed to be integrated in the
same rack with PDUs. The recommended component placement is shown in Figure 2
below. Other configurations can be used if IBM Safety Notices translations Pub # G229-
9054 rules are followed, and the lengths of the supplied cables are not exceeded.
The
Cloud Pak for Data System requires all IBM supplied and serviceable components
to be installed below the 42U height. Components on slides, such as server
chassis and connector nodes, must be located at or below U26.
Figure 2. Front view of installed base Cloud Pak component locations.
42
4U Blank Panel
41
40
39
38
2U Blank Panel
37
36
2U Blank Panel
35
34
PDU # 2 Right Power
33
Left Power PDU # 1
32
2U Blank Panel
31
30
1U Blank Panel
29
1U Blank Panel
28
1G Switch
27
1U Blank Panel
26
1U Blank Panel
25
25G Switch
24
1U Blank Panel
23
1U Blank Panel
22
1U Blank Panel
21
1U Blank Panel
12
1U Blank Panel
11
1U Blank Panel
10
1U Blank Panel
9
1U Blank Panel
8
1U Blank Panel
7
1U Blank Panel
6
Chassis 2
5
4
1U Blank Panel
3
Chassis 1
2
1
1U Blank Panel
Labeled “MGT1A”
Labeled “FAB1A”
Labeled “2”
Labeled “1”