© Copyright IBM Corporation 2019, 2020, 2021. Customer Install Guide, 2U Chassis
22
Package Contents
The shipping carton contains:
•
Chassis (enclosure)
•
Cable management arm box
The cable management arm box includes the following parts:
– One cable management arm
– Two Velcro straps (pre-attached)
– Seven cable baskets (pre-attached)
– Three slide mounting clips
•
Cable box (
DO NOT DISCARD!)
- Keep with chassis after it is installed in the
rack
The cable box includes the following parts:
– Two power cords
•
Slide box kit
The slide box kit includes the following parts:
– One right slide
– One left slide
– Two M5 screws
– Two washers
•
I/O kit (
DO NOT DISCARD!)
- Keep with chassis after it is installed in the rack
The I/O kit includes the following parts:
– Two blue RJ45 cables
– Five grey RJ45 cables
– Eight 3m fiber cables
– One Safety DVD
– This document
•
Transceiver kit (
DO NOT DISCARD!)
- Keep with chassis after it is installed in
the rack
The transceiver kit includes the following parts:
– Sixteen transceivers
Note: KEEP ALL POWER CORDS, SIGNAL CABLES AND TRANSCEIVERS
WITH THE INSTALLED CHASSIS FOR USE BY IBM INSTALLERS.
