© Copyright IBM Corporation 2019, 2020, 2021 Customer Install Guide, 1U Chassis
15
Cloud Pak for Data System 1U chassis
description
The IBM Cloud Pak for Data Systems, 1U chassis is a Dell based, server platform with
integrated storage, processing and I/O. The chassis comes as a pretested building
block loaded with software. The base system utilizes four chassis, but expansion
chassis can be included with the initial deployment or at a later date.
The chassis is can be installed in an IBM Cloud Pak rack or a customer supplied rack
meeting the guidelines in the
Customer Install Guide, Rack and System
document
included on the
Safety and Regulatory CD
shipped with your Cloud Pak for Data
System components. Additional details can be found in the
Site Prep Guide
at the IBM
Cloud Pak for Data System site.
The chassis includes multiple cold air inlets used to draw in cold air from the front of the
rack.
DO NOT BLOCK ANY INLET OR EXHAUST DUCTS, VENTS OR PORTS.
Blocked cooling access will adversely affect the performance of your Cloud Pak
for Data System and may void your warranty.
Power can be supplied by the available IBM Cloud Pak for Data System PDUs and line
cords or by customer supplied PDUs meeting the power requirements of the Cloud Pak
for Data System components.
If this is a customer install, IBM installation services will wire and power the system
once all racks, power and components are in place.
The front panel of the chassis provides the following components:
1
Left control panel. Contains the system health and system ID, status LED, and
the iDRAC Quick Sync 2 (wireless) indicator.
2
Drive slots. Contains Solid State Drives for Operating System and Storage
3
VGA port. Enables you to connect a display device to the system.
4
Right control panel. Contains the power button, USB port, iDRAC Direct micro
port, and the iDRAC Direct status LED.
5
Information tag
