IBM 4019
OSR
Envelope sizes
To Query Active Font Position
(Not applicable in Postscript mode)
When Ready is on, press Font to display position.
To Select Font Source
(Not applicable in Postscript mode)
1.
If Ready is on, press Start/Stop.
2.
Press Font until the source indicator is on.
To Select Font Position
(Not applicable in Postscript mode)
1.
If Ready is on, press Start/Stop.
2.
Hold Code, press Font until position is displayed.
3.
Release Code and Font.
Printing a Font Sample List
1.
Make sure Buffer is off and Ready is on.
2.
Press Orien Font
To Change Print Orientation
(Not applicable in Postscript mode)
1.
If Ready is on, press Start/Stop.
2.
Press Orientation.
To Query Active Data Stream or Test Function
With Ready on, press Orientation to display:
1
IBM PPDS mode
2
HP emulation mode
3
Plotter emulation mode
4
Print test function
5
Hex trace function
8
Postscript mode
To Select IBM PPDS mode
1.
Press and hold Paper and turn printer on.
2.
Release Paper when any indicators come on.
To Select HP emulation mode
1.
Press and hold Font and turn printer on.
2.
Release Font when any indicators come on.
To Select Plotter emulation mode
1.
Press and hold Orientation and turn printer on.
2.
Release Orientation when any indicators come on.
To Select Postscript mode
1.
Press and hold Paper and Font and turn printer on.
2.
Release Paper and Font when any indicators come on.
Error Codes
Use the following chart if the Check light is on and a number is in the display.
Press the Print/Check button to display the Secondary Code. When you release
the Print/Check button, the display returns to the primary Check Code.
Locate the number in the chart and perform the action indicated.
Common Problems and Fixes
Print Quality
Poor print quality may result from using nonxerographic paper. Paper may be
labeled for laser printer but may not be xerographic. Avoid office bond, rough or
highly textured letter head, and other non-xerographic papers which may contam-
inate the printer. Improper paper usage may first be apparent as: horizontal voids
across the page; top half of page light; smeared print; or fuzzy print every few
pages.
Colored papers must be able to withstand 190° C (374° F) temperatures. Recycled
papers less than 80 g/sqm may cause unacceptable results.
Envelopes may be sealed shut during printing under high humidity conditions.
Install either the manual input tray or the optional envelope feeder to prevent light
from reaching the print cartridge, which results in poor print quality, possible
damage to photoconductor.
No.
Paper
Millimeters
Inches
3
B5
182 X 257
7.17 X 10.1
4
A4
210 X 297
8.27 X 11.7
5
Exec.
184.2 X 266.7
7.25 X 10.5
6
A5
148 X 210
5.83 X 8.27
No.
Env.
Millimeters
Inches
1
73/4
98.4 X 190.5
3.875 X 7.5
2
9
98.4 X 225.4
3.875 X 8.9
3
10
104.8 X 241.3
4.12 X 9.5
Code
Action
4
DL
110 X 220
4.33 X 8.66
1
Cover open, print cartridge not installed or MAP 0120.
5
C5
162 X 229
6.38 X 9.02
2
1
Paper out, feed failure.
6
B5
176 X 250
6.93 X 9.84
2
2
Paper jam.
7
215.9 X 279.4
215.9 X 355.6
max.
8.5 X 11 (PS)
8.5 X 14 (other
modes)
2
3
Wrong paper length
2
4
Invalid manual feed.
3
1
Load paper request.
4
1
Requested font not present.
4
2
Requested font not available.
4
3
Font card removed.
4
4
Defective font card (or system board).
4
5
Download Font ID or Download Header error.
4
6
Download Character Header error.
4
7
Unsupported card installed.
5
Stop command received. Press Start/Stop to clear check.
6
1
Memory exceeded.
6
2
Complexity error.
7
3
Replace the system board.
9
Reset the printer (or system board).
9
1
Font card error (or system board).
9
2
Fuser temperature error.
9
3
Mirror motor not up to speed.
9
4
Laser failure.
9
5
System board failure.
9
6
RAM error. Turn off the printer; reseat the Memory option
(or system board, or Memory Option).
9
7
Fan stalled. Go to Fan MAP.
9
8
9
9
ROM Error. Replace the Postscript feature card (if
installed) or system board.
Symptom
Possible Causes
No lights, no motor movement
Line cord
ON/OFF switch
Fuse
System board
Postscript feature card
Postscript blue jumper.
Check Code or no air flow
LVPS
Cable
System board
Fan.
2
LM-2
IBM/TSS Internal Use Only
