background image

145

7

Novell Configuration 

For 10/100Base-T 
Interfaces

Overview

SMART

This chapter only applies to the Smart Ethernet Interface and 
provides additional information for Novell environments using the 
10/100Base-T interface, including:

Ethernet Interface Configuration. This section includes 
setting the preferred file server, setting password security, 
adjusting polling time, changing the Ethernet Interface name, 
changing the Ethernet Interface frame type, changing the 
Ethernet Interface mode, setting the Ethernet Interface NDS 
context, and setting the Ethernet Interface preferred NDS tree.

Host Configuration. This section includes NDS PSERVER 
setup, Bindery PSERVER setup, referencing a Bindery queue 
in NDS, and RPRINTER/NPRINTER setups. 

Troubleshooting tips. This section covers PSERVER setups, 
RPRINTER/NPRINTER setups, and printing related problems.

Summary of Contents for 4400 Series







































































































































































































































































































































Reviews: