BYTE
BIT
CONTENT
MAPPED FROM
BYTE
BIT
2
PRINTER UNIT STATUS
0 (LSB)
LEFT HOME POSITION
1
2
Set to 1 when the print head is in the left home position.
1
DOCUMENT ERROR
3
2
The document not inserted after DI station was selected and
the wait timed out.
2
DOCUMENT PRESENT UNDER THE TOP SENSOR
2
2
Set to 0 when a document is under the top document sensor.
3
RESERVED (Always =
′ 0 ′ )
n/a
4
FLASH EPROM LOAD ERROR OR MCT LOAD ERROR
3
3
5
RIBBON COVER OPEN
1
5
Set to 1 when the ribbon cover is open.
6
RESERVED (Always =
′ 0 ′ )
n/a
7 (MSB)
SJ STATION PAPER FAULT
5
7
Set to 1 when the paper is not present.
3
PRINTER UNIT STATUS
4
Contains the printer EC level with all status messages.
4
RESERVED (Always =
′00′)
n/a
5
PRINTER UNIT STATUS
6
Contains the current line count the printer is on.
6
FISCAL UNIT STATUS
(Note 1)
0 (LSB)
RESERVED (Always =
′ 0 ′ )
1
IPL STATUS
When set, it indicates that status byte 8 contains the IPL completion
status; and bit 4 of byte 6 is set as it was at IPL time.
2
IPL IN PROGRESS
Set to indicate that the fiscal unit is performing the IPL sequence.
3
MICROCODE EC
When set it indicates that status byte 8 contains the microcode EC.
4
PLD
This bit is set at IPL time to indicate that a command was in execution
during PLD and that all modifications caused by the suspended command have been deleted.
5
ASYNCHRONOUS STATUS
When set it indicates that the fiscal unit is executing an internal
command (e.g. POR sequence) or it received an asynchronous status from the printer.
6
INTERMEDIATE STATUS
When set it indicates that execution of a command is still in progress.
7 (MSB)
FISCAL UNIT BUSY
Set to 1 when a command is received while a previous command is still in execution.
7
ADDITIONAL DATA VERSION/COUNTRY CODE - x22 (34)
7 (MSB)
ADDITIONAL DATA
(Note 2)
6-5
VERSION CODE (hardware model)
4610 SureMark GR3/GR5 (RS-485) = x01 (01)
4-0
COUNTRY CODE
Turkey = x00010 (02)
8
FISCAL UNIT RETURN CODE
(Note 3)
9 - n
ADDITIONAL DATA (if byte 7 bit 7 is on)
------------------------------------------------------------------------------------------------------------
Note
: Bit 7 is the most significant bit and bit 0 is the least significant bit.
Note 1: When fiscal unit status byte 5 is 00 then command is complete.
Note 2: Where additional data follows the nine fiscal status bytes.
Note 3: When fiscal unit return code is 43 hex. (67
10
), it means that
no error is indicated on this status message.
Figure 2. Printer and Fiscal Unit Status - G R 3 / G R 5 Models - Part 2 of 2
Page 20 of 183 — IBM 4610 SureMark Fiscal Printer Turkey - Models GR3/GR5/GB3/GB5 Programmin
Summary of Contents for 4610 SureMark GB3
