background image

 

 

Appendix H Notices  

This information was developed for products and services offered in the U.S.A.  

IBM may not offer the products, services, or features discussed in this document in other countries. Consult 
your local IBM representative for information on the products and services currently available in your area. 
Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM 
product, program, or service may be used. Any functionally equivalent product, program, or service that does 
not infringe any IBM intellectual property right may be used instead. However, it is the user’s responsibility to 
evaluate and verify the operation of any non-IBM product, program, or service.  

IBM may have patents or pending patent applications covering the subject matter in this document. The 
furnishing of this document does not give you any license to these patents. You can send license inquiries, in 
writing, to:  

IBM Director of Licensing 
IBM Corporation 
North Castle Drive 
Armonk, NY 10504-1785 
 

U.S.A.  

For license inquiries regarding double-byte (DBCS) information, contact the IBM Intellectual Property 
Department in your country or send inquiries, in writing, to:  

IBM World Trade Asia Corporation 
Licensing 
2-31 Roppongi 3-chome, Minato-ku 
Tokyo 106, Japan 
 

The following paragraph does not apply to the United Kingdom or any other country where such provisions 
are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS 
PUBLICATION 

AS IS

 WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, 

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, 
MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer 
of express or implied warranties in certain transactions, therefore, this statement may not apply to you.  

This information could include technical inaccuracies or typographical errors. Changes are periodically made 
to the information herein; these changes will be incorporated in new editions of the publication. IBM may 
make improvements and/or changes in the product(s) and/or program(s) described in this publication at any 
time without notice.  

IBM may use or distribute any of the information you supply in any way it believes appropriate without 
incurring any obligation to you.  

Electronic emission notices 

 

Federal Communications Commission (FCC) Statement 

 

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. This equipment generates, uses, 
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction 

SurePOS 500 Model XX3 Technical Reference, v 1.3                                                                 Page 77 of 

81 

Summary of Contents for 4840-563


















































































Reviews: