background image

 

Appendix A. Product warranties and notices

 39

Limitation of Liability:

 The following is added to this Section: 

Where IBM is in breach of a condition or warranty implied by the Trade Practices Act 
1974, IBM's liability is limited to the repair or replacement of the goods or the supply 
of equivalent goods.  Where that condition or warranty relates to right to sell, quiet 
possession or clear title, or the goods are of a kind ordinarily acquired for personal, 
domestic or household use or consumption, then none of the limitations in this 
paragraph apply.

PEOPLE'S REPUBLIC OF CHINA: Governing Law:

 The following is added to this 

Statement:
The laws of the State of New York govern this Statement.

INDIA: Limitation of Liability:

 The following replaces items 1 and 2 of this Section:

1. liability for bodily injury (including death) or damage to real property and 

tangible personal property will be limited to that caused by IBM's negligence;

2. as to any other actual damage arising in any situation involving nonperformance 

by IBM pursuant to, or in any way related to the subject of this Statement of 
Warranty, IBM's liability will be limited to the charge paid by you for the 
individual Machine that is the subject of the claim.

NEW ZEALAND: The IBM Warranty for Machines:

 The following paragraph is 

added to this Section:
The warranties specified in this Section are in addition to any rights you may have 
under the Consumer Guarantees Act 1993 or other legislation which cannot be 
excluded or limited.  The Consumer Guarantees Act 1993 will not apply in respect of 
any goods which IBM provides, if you require the goods for the purposes of a 
business as defined in that Act.

Limitation of Liability:

 The following is added to this Section:

Where Machines are not acquired for the purposes of a business as defined in the 
Consumer Guarantees Act 1993, the limitations in this Section are subject to the 
limitations in that Act.

EUROPE, MIDDLE EAST, AFRICA (EMEA)

The following terms apply to all EMEA countries.

The terms of this Statement of Warranty apply to Machines purchased from an IBM 
reseller.  If you purchased this Machine from IBM, the terms and conditions of the 
applicable IBM agreement prevail over this warranty statement.

Warranty Service

 If you purchased an IBM Machine in Austria, Belgium, Denmark, Estonia, Finland, 
France, Germany, Greece, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, 
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland or United Kingdom, you 
may obtain warranty service for that  Machine in any of those countries from either (1) 
an IBM reseller approved to perform warranty service or (2) from IBM.

If you purchased an IBM Personal Computer Machine in Albania, Armenia, Belarus, 
Bosnia and Herzegovina, Bulgaria, Croatia, Czech Republic, Georgia, Hungary, 
Kazakhstan, Kirghizia, Federal Republic of Yugoslavia, Former Yugoslav Republic of 
Macedonia (FYROM), Moldova, Poland, Romania, Russia, Slovak Republic, Slovenia, 
or Ukraine, you may obtain warranty service for that Machine in any of those 
countries from either (1) an IBM reseller approved to perform warranty service or (2) 
from IBM.

The applicable laws, Country-unique terms and competent court for this Statement 
are those of the country in which the warranty service is being provided.  However, 

Summary of Contents for 5100

































































Reviews: