Attention:
To avoid breaking the DIMM retaining clips or damaging the
DIMM connectors, open and close the clips gently.
7. Open the retaining clips and, if necessary, remove any existing DIMM.
8. Touch the static-protective package that contains the DIMM to any
unpainted
metal surface on the system-board tray; then, remove the DIMM from the
package.
9. Turn the DIMM so that the DIMM keys align correctly with the connector on the
system board.
10. Insert the DIMM into the connector by aligning the edges of the DIMM with the
slots at the ends of the DIMM connector. Firmly press the DIMM straight down
into the connector by applying pressure on both ends of the DIMM
simultaneously. The retaining clips snap into the locked position when the
DIMM is firmly seated in the connector.
Attention:
If there is a gap between the DIMM and the retaining clips, the
DIMM has not been correctly installed. Open the retaining clips, remove the
DIMM, and then reinsert it.
If you have other devices to install or remove, do so now. Otherwise, go to
“Completing the installation” on page 45.
Installing an IBM virtual media key
To install an IBM virtual media key, complete the following steps:
1. Read the safety information that begins on page vii and “Installation guidelines”
2. Turn off the system-board tray and all attached devices (see “Turning off the
system-board tray” on page 21).
3. If the system-board tray is installed in a chassis, remove it (see “Removing a
system-board tray from a 2U chassis” on page 25 or “Removing a system-board
tray from a 3U chassis” on page 27).
44
System x iDataPlex dx360 M2: User's Guide
Summary of Contents for 6380
