Code V Emulation Menu
213
Truncate Off Page Alpha
When enabled, this parameter prevents the printing of Error 48 (Element Off
Page Error) if alphanumeric data, including spaces, extends beyond the right
side of the form.
•
Disable (the default)
•
Enable
True Vertical 1/10
Determines if a vertical 1/10 of an inch parameter is used as 1/10 of an inch
(Enabled) or as 7/72 of an inch (Disabled). When used as 1/10 of an inch,
rounding will occur to the nearest 1/72 of an inch. This can cause vertical
moves that have the same value to differ by _1/72 of an inch. When used as
7/72 of an inch, the absolute move is slightly smaller than expected. For
example, a one inch move would be 70/72 of an inch. Vertical moves that
have the same value will be identical in length.
•
Disable (the default).
•
Enable
Absorb at ^PY
•
Absorb Motion (the default). Prevents paper motion following a system
terminator in a graphics (cc)PY command.
•
Disable. When disabled, system terminators following a graphics
command are sent to the printer and result in paper motion.
•
Absorb All. When absorb all is selected, the system ignores all the data
and terminator until a host generated terminator is detected.
UPC Descenders
This parameter determines if a gap is left for human readable data in UPC/
EAN bar codes, even if there is no human readable data. There will be no
change if there is human readable data.
•
Enable (the default). Leaves a gap even if there is no human readable
data.
•
Disable. Does not leave a gap if there is no human readable data.
Rotate Character Size
The Rotated Character Size option determines if rotated (clockwise/counter-
clockwise), expanded characters have a different size than a non-rotated
character with the same size parameters (Adjusted) or the same size (Not
Adjusted).
•
Adjusted (the default)
•
Not Adjusted
Summary of Contents for 6400-i05
