Acoustical Noise Emissions
Acoustical Characteristic
Product Configuration
Declared A-Weighted Sound Power
Level, L
WAd
(B)
Declared A-Weighted Sound Pressure
Level, LpAm (dB)
Operating
Idle
Operating
Idle
7040 Acoustical Doors
7.5
7.5
57
57
7040 Slimline Doors
7.9
7.9
62
62
Notes:
1. Noise levels cited are for a typical configuration (Bulk Power, CEC cage, battery option, media drawer, and two
I/O drawers).
2. The 0.6-B (6-dB) reduction in noise emission levels with the acoustical rear door corresponds to a factor of 4
reduction. That is, the noise level of a single frame with thin covers is about the same as the noise level of four
frames with acoustical covers.
3. L
WAd
is the upper-limit A-weighted sound power level; LpAm is the mean A-weighted sound pressure level at the
1-meter bystander positions; 1 B = 10 dB.
4. All measurements made in conformance with ISO 7779 and declared in conformance with ISO 9296.
Environmental Specifications
Environmental Specification
Operating
Non-Operating
Storage
Shipping
Temperature
10 to 32°C
(50 to 90°F)
Max. of 24 ° C
(75.2 ° F) with
4mm tape or DVD
RAM in rear
positions of the
Media Subsystem
10 to 43°C
(50 to 109°F)
1 to 60°C
(34 to 140°F)
–40 to 60°C
(–40 to 140°F)
Relative Humidity
(Noncondensing)
8 to 80 %
8 to 80 %
5 to 80 %
5 to 100 %
Maximum Wet Bulb
23°C (73°F)
27°C (73°F)
29°C (84°F)
29°C (84°F)
Notes:
1. When an IBM-approved vapor bag and desiccant packets are used to protect the system, storage specifications
are valid for 6 months and shipping specifications are valid for 1 month. Otherwise, storage and shipping
specifications are valid for two weeks each.
2. The upper limit of the dry bulb temperature must be derated 1 degree C per 189 m (619 ft.) above 1295 m (4250
ft.). Maximum altitude is 3048 m (10,000 ft.).
Weight Distribution
The following table shows dimensions and weights used to calculate floor loading for the
Eserver
pSeries
690. All floor-loading calculations are intended for a raised-floor environment.
1 Frame with Slimline Covers
1 Frame with Acoustical Covers
Weight
1085 kg (2392 lbs.)
1099 kg (2422 lbs.)
Width
750 mm (29.5 in.)
750 mm (29.5 in.)
Depth
1173 mm (46.2 in.)
1173 mm (46.2 in.)
136
Site and Hardware Planning Information
Summary of Contents for 7012 397
