4-50
Service Guide
CPU Module Fans
Removal
1. Do the “CPU Module” removal procedure on page 4-39.
2. Remove the cable tie holding the fan power cable connector.
3. Disconnect the fan power cable.
4. Remove all four vibration isolators by pulling the fan away from the media module until
the vibration isolators disengage from either the fan or the media module.
5. After the four vibration isolators are removed, remove the fan.
Fan #9
CPU Module
Fan Power Cables
Air Flow
Vibration Isolators
(Four Per Fan)
Fan #10
Fan #8
This fan assembly is
used for 604 based
R-Series CPU
Enclosures.
Summary of Contents for 7015-R50
