14.
Press
C
to create the RAID array.
15.
In the
Create and save new array
menu, use the arrow keys to select
Save Changes then exit this
menu
, and then press
Enter
.
16.
Press
Esc
to exit
LSI MPT setup utility
.
17.
Press
Esc
to exit the previous menu.
18.
Select
Exit the Configuration Utility and Restart
.
19.
When a prompt displays the message,
The action required is stop controller
, enter
Yes
.
20.
Press
Esc
three times to exit
Setup
.
21.
Press
Y
to exit
Setup
completely.
Backing up partition profiles
Learn how to back up the profile data of a virtual server.
To back up the profile data of a virtual server, you must be a member of one of the following roles:
v
Super administrator
v
Service representative
To back up the profile data of a virtual server, perform the following steps:
1.
In the
Welcome
page, under the
Resource
tab, select the server.
2.
Select
Actions
>
System Configuration
>
Manage Virtual Server Data
>
Backup
.
3.
Type the name you want to use for this backup file.
4.
Click
OK
.
Systems Director Management Console problem analysis
Use this information to diagnose and repair problems that are related to the IBM Systems Director
Management Console (SDMC).
Troubleshooting, service, and support using Systems Director Management Console
17
Summary of Contents for 7042-CR6
