About this task
To install the air baffle (two microprocessors installed), complete the following
steps.
Procedure
1.
Carefully turn the server on its side so that it is lying flat, with the cover facing
up.
Attention:
Do not allow the server to fall over.
2.
Unlock and remove the left-side cover (see “Removing the left-side cover” on
page 39).
3.
Align the positioning pins on the ends of the air baffle with the locating holes
in the server chassis and fan cage assembly.
4.
Slide the air baffle down into the server until the positioning pins fit into the
locating holes; then, press down on the air baffle until the pinch tab clicks into
place.
5.
Install and lock the left-side cover (see “Installing the left-side cover” on page
205).
What to do next
If you have replaced a component or installed an optional device in the server, you
need to reconnect the power cords and all external cables, and turn on the server
and peripheral devices.
212
System x3500 M4 Type 7383: Installation and Service Guide
Summary of Contents for 7383
