(RID) tag provided with the new system-board assembly; then, place label 1
(larger label) on the base of the planar and label 2 (smaller label) on the bottom
side of the control panel.
2.
Install all of the components in the following list that you removed from the
old system-board assembly onto the new system-board assembly.
v
DIMMs. See “Installing a memory module” on page 65.
v
USB module. See “Installing a USB Flash key” on page 70.
v
I/O expansion cards. See “Installing a CIOv-form-factor expansion card” on
page 75, “Installing a horizontal-compact-form-factor expansion card” on
page 76, and“Installing a storage interface card” on page 77.
v
Storage drives. See “Installing a hot-swap storage drive” on page 63.
v
Microprocessors and heat sinks. See “Installing a microprocessor and heat
sink” on page 94.
3.
Install the optional expansion unit, if you removed one from the blade server to
replace the battery (see “Installing an optional expansion unit” on page 85 for
instructions).
4.
Install the cover onto the blade server (see “Closing the blade server cover” on
page 56).
5.
Install the blade server into the BladeCenter unit (see “Installing the blade
server in a BladeCenter unit” on page 53).
6.
The Universal Unique Identifier (UUID) must be updated when the system
board is replaced. Use the Advanced Settings Utility to update the UUID in the
UEFI-based server (see “Updating the Universal Unique Identifier (UUID)” on
page 25).
7.
Update the server with the latest firmware or restore the pre-existing firmware
that the customer provides on a diskette or CD image. Make sure that you have
Chapter 5. Removing and replacing blade server components
99
Summary of Contents for 7870B4U
