Community names in the SNMP community table must be unique. If you make
multiple entries using the same community name, the first entry is kept and
processed and all duplicate entries are ignored.
To configure your SNMP communities, select SNMP Community Configuration
Menu from the Management Menu. Figure 21 shows SNMP community information
you need to specify.
SNMP Community Name
This name identifies each SNMP community; the name can be up to 16
characters, and it is case-sensitive. A
public
community means users have
read only access. A
private
community is for users who have read/write
access. Two communities have default values. The default names are
Public and Private. You can replace these default community names with
unique identifiers for each community. The default values for the remaining
four community names are blank.
Client IP Address
This attribute is an IP address (or portion thereof) from which this device
will accept SNMP packets with the associated community. The requesting
entity’s IP address is logical-ANDed with the Client IP Mask and the result
must match the Client IP Address. The default value is 0.0.0.0.
Note: If the Client IP Mask is set to 0.0.0.0, a Client IP Address of 0.0.0.0
matches all IP addresses.
Client IP Mask
This attribute is a mask to be logical-ANDed with the requesting entity’s IP
address before comparison with the Client IP Address. If the result matches
with Client IP Address then the address is an authenticated IP address. For
example, if the Client IP Address is 9.47.128.0 and the corresponding Client
IP Mask is 255.255.255.0, a range of incoming IP addresses would match,
that is, the incoming IP addresses could be a value in the following range:
9.47.128.0 to 9.47.128.255.
Figure 21. SNMP community configuration
Chapter 4. Using the Terminal Interface
39
Summary of Contents for 8275-416
