v
Lun0off
v
nomigrate
v
DRmigrate
35. Install Symplicity Storage Manager Field Tool (SymFT)
(http://www.ibm.com/pc/support).
36. Update the drive firmware (http://www.ibm.com/pc/support).
37. Open the SM7 client and create arrays (http://www.ibm.com/pc/support).
38. Setup storage partitioning (http://www.ibm.com/pc/support).
39. Configure drives under Windows NT.
40. Install clustering.
41. Connect the SAN Data Gateway through the serial port.
42. Update firmware on the SAN Data Gateway (http://www.ibm.com/storage).
43. Set the IP address on the SAN Data Gateway (http://www.ibm.com/storage).
44. Install SAN explorer.
45. Install StorWatch.
46. Install the tape backup software.
47. Proceed with normal use.
20
IBM Fibre Channel: Basic SAN Configuration Setup Guide
Summary of Contents for 86596ry - Servers Netfinity Pentium 3
