SCSI error codes
Error Code
FRU/Action
All SCSI Errors
One or more of the following
might be causing the
problem:
A failing SCSI device
(adapter, drive,
controller)
An improper SCSI
configuration or SCSI
termination jumper
setting
Duplicate SCSI IDs in
the same SCSI chain
A missing or improperly
installed SCSI
terminator
A defective SCSI
terminator
An improperly installed
cable
A defective cable
1. External SCSI
devices must be
powered-on before
you power-on the
server.
2. The cables for all
external SCSI devices
are connected
correctly.
3. If you have attached
an external SCSI
device to the server,
make sure the external
SCSI termination is set
to automatic.
4. The last device in each
SCSI chain is
terminated correctly.
5. The SCSI devices are
configured correctly.
Netfinity 5500 M20 - Type 8662
311
Summary of Contents for 866251Y - Netfinity 5500 M20
