If you plan to transport the rack cabinet with the
server installed, you must secure the rails to the rack
flange. Using a screwdriver, tighten a rack-retaining
screw
into the hole
above the alignment pins on
the front and back of each fixed rail assembly.
F
G
4.4
4.3
Install the fixed rail assemblies .
A
Press the release tab
away from the rail
and pull the latch assembly tab
to the
retracted position and lock the latch assembly.
The alignment pins
located on the back of
the rail should be fully retracted.
E
C
D
,
1.
3.
4.
Repeat steps 1 through 4 for the other fixed rail assembly.
From the front of the rack, slide the front latch assembly to the front rack flange, and
repeat steps 3 and 4 to attach the front of the rail to the rack.
2.
6.
A
C
B
D
E
From the back of the rack,
place the rack flange
between the rail flange and
the retracted alignment
pins .
B
D
F
G
Front view
5.
Repeat step 1 for the front latch
assembly.
Align the pins with the correct holes in the rack
flange and press the latch assembly release
tab
to extend the alignment pin
into the
back of the rack.
,
E
D
You have finished installing the
fixed rail assemblies. Go to task
5
Install the server onto the
fixed rail assemblies.
Actual size
part 12J5289
