Appliance installation
Attention:
Allow the enclosure assembly to acclimate to room temperature before installation. Store the
disk drives at room temperature for at least 2 hours before use.
Identify the sections of the rack rails
The box contains two rail kits. Each rail kit contains three sections, as shown in the following figure:
v
The outer rail mounts to the front rack vertical post and rear rack vertical post.
v
The middle rail allows the outer rail to extend or shorten to accommodate racks of different depths.
v
The inner rail mounts on the side of the appliance and slides into the outer rail that is mounted on the
rack, if wanted.
Release the inner rail
Remove the inner rail from each rail kit, as shown in the following figure.
1.
Pull on the front release tab to unlock the inner rail from the rail kit.
2.
Remove and set aside each inner rail.
Figure 2. Identifying the sections of the rack rails
Figure 3. Remove the inner rails from both rail kits
Chapter 3. Install the appliance into a rack
7
Summary of Contents for Accesser F5100 3401-A02
