Connect the LAN Cable (If Applicable)
The LAN cable is recommended because each active partition reports errors to the
HMC’s Service Focal Point application through the LAN network. The HMC must be
attached to the system’s LAN, and each partition should have a LAN adapter assigned
as a resource.
Connect the LAN to the adapters assigned to each partition and to the LAN connection
on the HMC system hardware.
Plug in the HMC Power Cable
1. Plug in the power cable, as shown in the following illustration.
2. Plug the power cables for the monitor, HMC, and modem into electrical outlets.
Configure the Network
To configure the network, do the following:
v
Log in to the (HMC) using the user ID
hscroot
and password
abc123
.
Note: User IDs and passwords are case-sensitive. Enter the user ID and password
exactly as shown.
v
Select the System Configuration Application in the Navigation area.
v
Select Customize Network Settings in the Contents area.
v
Type the appropriate network information in the IP Address, Name Services, and
Routing tabs on the Network Configuration window.
v
Select OK.
For more information on configuring the network, refer to the
IBM Hardware
Management Console for pSeries Operations Guide, order number SA38-0590.
Configure Inventory Scout Services
Inventory Scout Services is an AIX tool that surveys managed systems for hardware
and software information.
To set up Inventory Scout Services for each system managed by the HMC, and for
each logical partition running an instance of AIX, all partitions must be configured in
order to conduct microcode surveys or collect Vital Product Data (VPD).
Chapter 4. Installing Options
69
Summary of Contents for @Server pSeries 630 6C4
