–
Integrated Management Module
Select this choice to view or change the settings for the integrated
management module (IMM).
-
POST Watchdog Timer
Select this choice to view or enable the POST watchdog timer.
-
POST Watchdog Timer Value
Select this choice to view or set the POST loader watchdog timer value.
-
Reboot System on NMI
Select this choice to enable or disable restarting the system whenever a
nonmaskable interrupt (NMI) occurs.
Disable
is the default.
-
Commands on USB Interface Preference
Select this choice to specify whether the Ethernet over USB interface is
enabled or disabled.
Note:
This option is primarily for older operating systems that have
problems with USB communications device class (CDC) Ethernet interfaces.
Disabling this option will cause the following issues:
v
Online update packages will not work.
v
Updates that use Bootable Media Creator (BoMC) will not work because
BoMC uses the LAN over USB interface.
v
You must install the IPMI device driver to use ASU to change the IMM
or UEFI configuration.
v
You cannot set the IMM OS Loader watchdog.
-
Network Configuration
Select this choice to view the system management network interface port,
the IMM MAC address, the current IMM IP address, and host name; define
the static IMM IP address, subnet mask, and gateway address; specify
whether to use the static IP address or have DHCP assign the IMM IP
address; save the network changes; and reset the IMM.
-
Reset IMM to Defaults
Select this choice to reset the IMM to the default settings.
-
Reset IMM
Select this choice to reset the IMM.
–
Legacy Support
Select this choice to view or set legacy support.
-
Force Legacy Video on Boot
Select this choice to enable or disable force INT video support, if the
operating system does not support UEFI video output standards. The
default is
Enable
.
-
Rehook INT
Select this choice to enable or disable devices from taking control of the
boot process. The default is
Disable
.
-
Legacy Thunk Support
Select this choice to enable or disable UEFI to interact with PCI mass
storage devices that are non-UEFI compliant. The default is
Enable
.
–
System Security
Select this choice to view or configure security options for Trusted Platform
Module (TPM).
74
IBM BladeCenter HX5 Type 7873, 7872, 1910, and 1909: Installation and User's Guide
Summary of Contents for BladeCenter HX5
