–
Network
Select this choice to view or configure the network device options, such as
iSCSI, PXE, and Broadcom.
–
Trusted Platform Module (TPM)
Select this choice to view and configure TPM settings.
v
Date and Time
Select this choice to set the date and time for the server. The date is set in
month
/
day
/
year
format. The time is set in 24-hour format (
hour
:
minute
:
second
).
This choice is on the full UEFI Setup Utility menu only.
v
Start Options
Select this choice to view or change the start options, including the startup
sequence, keyboard NumLock state, PXE boot option, and PCI device boot
priority. Changes in the startup options take effect when you start the blade
server.
The startup sequence specifies the order in which the blade server checks
devices to find a boot record. The blade server starts from the first boot record
that it finds. If the blade server has Wake on LAN hardware and software and
the operating system supports Wake on LAN functions, you can specify a
startup sequence for the Wake on LAN functions. For example, you can define a
startup sequence that checks for a disc in the CD-RW/DVD drive, then checks
the hard disk drive, and then checks a network adapter.
This choice is on the full UEFI Setup utility menu only.
v
Boot Manager
Select this choice to view, add, delete, or change the device boot priority, boot
from a file, select a one-time boot, or reset the boot order to the default setting.
v
System Event Logs
Select this choice to access the System Event Manager, where you can view the
POST event log and the system-event log.
The POST event log contains the three most recent error codes and messages
that were generated during POST.
The system-event log contains POST and system management interrupt (SMI)
events and all events that are generated by the baseboard management
controller that is embedded in the integrated management module.
Important:
If the system-error LED on the front of the server is lit but there are
no other error indications, clear the system-event log. Also, after you complete a
repair or correct an error, clear the system-event log to turn off the system-error
LED on the front of the server.
–
POST Event Viewer
Select this choice to enter the POST event viewer to view the POST error
messages.
–
System Event Log
Select this choice to view the system-event log.
–
Clear System Event Log
Select this choice to clear the system-event log.
v
User Security
Select this choice to set, change, or clear passwords.
Chapter 4. Configuring the blade server
75
Summary of Contents for BladeCenter HX5
