Table 14. BA000010 to BA400002 Partition firmware SRCs (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v
See Chapter 3, “Parts listing, Type 7998,” on page 235 to determine which components are CRUs and which
components are FRUs.
Error code
Description
Action
BA120002
On an undetermined SCSI device, test
unit ready failed; sense data available
1.
Troubleshoot the SCSI devices.
2.
Verify that the SCSI cables and devices are
properly plugged. Correct any problems
that are found.
3.
Replace the SCSI cables and devices.
4.
If the problem persists:
a.
Go to “Checkout procedure” on page
186.
b.
Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis
assembly” on page 274.
BA120003
On an undetermined SCSI device, send
diagnostic failed; sense data available
1.
Troubleshoot the SCSI devices.
2.
Verify that the SCSI cables and devices are
properly plugged. Correct any problems
that are found.
3.
Replace the SCSI cables and devices.
4.
If the problem persists:
a.
Go to “Checkout procedure” on page
186.
b.
Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis
assembly” on page 274.
BA120004
On an undetermined SCSI device, send
diagnostic failed; devofl command
1.
Troubleshoot the SCSI devices.
2.
Verify that the SCSI cables and devices are
properly plugged. Correct any problems
that are found.
3.
Replace the SCSI cables and devices.
4.
If the problem persists:
a.
Go to “Checkout procedure” on page
186.
b.
Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis
assembly” on page 274.
BA120010
Failed to generate the SAS device
physical location code. The event log
entry has the details.
1.
Reboot the blade server.
2.
If the problem persists:
a.
Go to “Checkout procedure” on page
186.
b.
Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis
assembly” on page 274.
Chapter 2. Diagnostics
69
Summary of Contents for BladeCenter JS12
