3.
Open and remove the blade server cover. See “Removing the blade server
cover” on page 242.
4.
Remove the horizontal (CFFh) CFFe expansion card, which is the larger card.
a.
Pull up on the camming lever to disengage the card from the connector.
b.
Gently pivot the card out of the expansion card connector.
c.
Slide the notched end of the card out of the raised hooks on the system
board and lift the card out of the blade server.
d.
Optional: Reattach the plastic cover for the PCI-Express connector, if it is
available.
5.
Gently lift the vertical (CFFv) CFFx expansion card (the smaller card) out of the
blade server.
6.
If you are instructed to return the expansion card, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
Installing a combination-form-factor expansion card
Install a combination-form-factor expansion card to expand the I/O capabilities of
the blade server.
To install a combination-form-factor expansion card, complete the following steps:
Expansion cards
Figure 23. Installing a combination-form-factor expansion card
262
JS22 Type 7998: Problem Determination and Service Guide
Summary of Contents for BladeCenter JS22
