Table 21. C2001000 to C20082FF checkpoints (continued)
v
If the system hangs on a progress code, follow the suggested actions in the order in which they are listed in
the Action column until the problem is solved. If an action solves the problem, you can stop performing the
remaining actions.
v
See Chapter 3, “Parts listing, type 7891,” on page 225 to determine which components are CRUs and which
components are FRUs.
Progress code
Description
Action
C2006030
Priming LP configuration LID
1.
Go to “Recovering the system firmware” on
page 217.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 264.
C2006040
Preparing to initiate LID load from load
source
1.
Go to “Recovering the system firmware” on
page 217.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 264.
C2006050
LP configuration LID primed
successfully
1.
Go to “Recovering the system firmware” on
page 217.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 264.
C2006060
Waiting for LID load to complete
1.
Go to “Recovering the system firmware” on
page 217.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 264.
C2006100
LID load completed successfully
1.
Go to “Recovering the system firmware” on
page 217.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 264.
C2006200
Loading raw kernel memory image
1.
Go to “Recovering the system firmware” on
page 217.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 264.
C20062FF
Loading raw kernel memory image
completed successfully
1.
Go to “Recovering the system firmware” on
page 217.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 264.
C2008040
Begin transfer slot locks to partition
1.
Go to “Recovering the system firmware” on
page 217.
2.
Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 264.
112
Power Systems: Problem Determination and Service Guide for the IBM PS703 (7891-73X) and PS704 (7891-74X)
