Table 11. 6xxxyyyy SRCs (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v
See Chapter 3, “Parts listing, type 7891,” on page 225 to determine which components are CRUs and which
components are FRUs.
6xxxyyyy
Error Codes
Description
Action
632BCFC1
A virtual optical device cannot
access the file containing the
list of volumes.
On this partition and on the Network File System server, verify
that the proper file is specified and that the proper authority is
granted.
632BCFC2
A non-recoverable error was
detected while reading the list
of volumes.
Resolve any errors on the Network File System server.
632BCFC3
The data in the list of volumes
is not valid.
On the Network File System server, verify that the proper file is
specified, that all files are entered correctly, that there are no blank
lines, and that the character set used is valid.
632BCFC4
A virtual optical device cannot
access the file containing the
specified optical volume.
On the Network File System server, verify that the proper file is
specified in the list of volumes, and that the proper authority is
granted.
632BCFC5
A non-recoverable error was
detected while reading a
virtual optical volume.
Resolve any errors on the Network File System server.
632BCFC6
The file specified does not
contain data that can be
processed as a virtual optical
volume.
On the Network File System server, verify that all the files specified
in the list of optical volumes are correct.
632BCFC7
A virtual optical device
detected an error reported by
the Network File System
server that cannot be
recovered.
Resolve any errors on the Network File System server.
632BCFC8
A virtual optical device
encountered a non-recoverable
error.
Install any available operating system updates.
632Cyyyy codes are virtual optical SRCs
632CC000
Informational system log entry
only.
No corrective action is required.
632CC002
self configuring SCSI device
(SCSD) selection or reselection
timeout occurred.
Refer to the hosting partition for problem analysis.
632CC010
Undefined sense key returned
by device.
Refer to the hosting partition for problem analysis.
632CC020
Configuration error.
Refer to the hosting partition for problem analysis.
632CC100
SCSD bus error occurred.
Refer to the hosting partition for problem analysis.
632CC110
SCSD command timeout
occurred.
Refer to the hosting partition for problem analysis.
632CC210
Informational system log entry
only.
No corrective action is required.
632CC300
Media or device error
occurred.
Refer to the hosting partition for problem analysis.
34
Power Systems: Problem Determination and Service Guide for the IBM PS703 (7891-73X) and PS704 (7891-74X)
