To access the blade server documentation from this site, click
Systems hardware
>
BladeCenter information
>
Blade servers
.
To determine which blade servers are compatible with the BladeCenter S chassis,
see the IBM ServerProven Web site at http://www.ibm.com/servers/eserver/
serverproven/compat/us/eserver.html.
About this task
Blade
filler
Release
handles
Blade
server
Procedure
1.
Select the bay for the blade server. Depending on the blade server type and the
optional devices that are installed in the blade server, two or more adjacent
bays might be required.
Important:
If SAS connectivity modules are installed in the BladeCenter S
chassis, the blade server bay that you use when installing a blade server is
determined by the SAS connectivity module zoning configuration that you
have selected for the BladeCenter S system. See the
IBM BladeCenter S Type 8886
Planning Guide
for more information about zoning configuration.
2.
Open both release handles (rotate the top handle up and the bottom handle
down).
3.
Slide the blade server into the blade server bay until it stops.
4.
Close both release handles (rotate the top handle down and the bottom handle
up).
5.
(Optional) Write identifying information on one of the labels that come with
theBladeCenter S chassis; then, place the label on the BladeCenter S chassis top
bezel, just above the blade server.
Important:
Do not place the label on the blade server or in any way block the
ventilation holes on the bezel.
Chapter 4. Removing and replacing BladeCenter components
91
Summary of Contents for BladeCenter S
