To determine which I/O modules are compatible with the BladeCenter S chassis,
see the IBM ServerProven Web site at http://www.ibm.com/servers/eserver/
serverproven/compat/us/eserver.html.
About this task
Important:
If you are installing SAS RAID controller modules in a BladeCenter S
chassis, refer to the
IBM BladeCenter SAS RAID Controller Installation and User's
Guide
for additional steps that might need to be performed.
Important:
If you are installing SAS RAID controller modules in a BladeCenter S
chassis, refer to the BladeCenter S SAS RAID Controller Module Installation and
User's Guide for additional steps that might need to be performed.
Module
filler
Release
handle
(open)
I/O
module
Procedure
1.
Open the release handle (rotate the handle down).
2.
Slide the module into the module bay until it stops.
3.
Close the release handle (rotate the handle up).
4.
Connect all cables to the module.
Results
The placement of the I/O module in the BladeCenter S chassis depends on the
type of I/O module being installed. For example, an Ethernet switch module is
typically deployed in I/O module bay 1 or I/O module bay 2. SAS connectivity
modules or SAS RAID controller modules are deployed in I/O module bays 3 and
4.
Note:
v
If you install an Ethernet switch module in I/O module bay 2, you must also
install an expansion card option, such as the 2/4 Port Ethernet Expansion Card,
in each of the blade servers that will access the Ethernet network through that
I/O module.
94
BladeCenter S Type 7779/8886: Problem Determination and Service Guide
Summary of Contents for BladeCenter S
