LED window
LED holes
Ball-studs
Bezel
Ball-stud clips
LED pipes
Air-filter
Air-filter retainer
6.
Align the LED window of the filter with the holes for the LEDs on the bezel
and lay the filter into the bezel frame.
7.
Align the air-filter retainer over the filter with the ball-stud clips facing down
and the LED light pipe lined up with the LED holes on the bezel.
8.
Gently push the air-filter retainer down until it snaps into the ball-stud
fasteners on the back of the bezel.
9.
Install the bezel on the front of the system (see “Installing the bezel assembly”
on page 41 for instructions).
Removing and installing power modules
The BladeCenter T unit is separated into two power domains. To support devices
in power domain B, a power-supply module option (consisting of two power
modules) must be installed.
The following table summarizes the modules that are powered by each power
domain.
Power domain
Power-module bays
Modules powered by the power domain
A
1 and 2
I/O-module bays 1 and 2
Management-module bays 1 and 2 Media
tray Blade bays 1 through 4
B
3 and 4
Blade bays 5 through 8 I/O-module bays 3
and 4
Chapter 4. Setting up the BladeCenter T hardware
43
Summary of Contents for BladeCenter T
