Lower flex circuit assembly
Complete the following steps to replace the lower flex circuit assembly.
Note:
v
Read “Installation guidelines” on page 35.
v
Read the safety notices in “Safety” on page v.
v
Read “Handling static-sensitive devices” on page 37.
1.
Shut down and remove power from the system (see “Shutting down the
BladeCenter T unit” on page 17).
2.
Remove each power cord from the input power connections on the rear of the
BladeCenter T unit.
3.
Remove the KVM module from the rear of the system (see “Removing the
KVM module” on page 54).
4.
Remove the LAN module from the rear of the system (see “Removing the
LAN module” on page 55).
5.
Remove the rear panel.
6.
Remove the I/O switch or filler that is below the lower flex circuit assembly
that you are removing.
7.
Using a screwdriver, loosen the two captive fasteners on the old lower flex
circuit assembly.
Captive fasteners
Lower flex circuit assembly
8.
Carefully remove the old lower flex circuit assembly by gripping the top edge
of the assembly and pulling the unit out of the chassis.
9.
Remove the new lower flex circuit assembly from the packaging.
10.
Align the assembly so that the stamped position identifier "BTM" is facing
you, and position the front end of the new lower flex circuit assembly into the
assembly bay in the chassis, making sure the leading edge rests against the
ceiling of the bay.
11.
Carefully push the assembly all the way into the bay.
66
BladeCenter T Type 8267: Hardware Maintenance Manual and Troubleshooting Guide
Summary of Contents for BladeCenter T
