manualshive.com logo in svg

IBM DS3500, Introduction And Implementation Manual

The IBM DS3500 is a powerful data storage solution for businesses, offering high performance and reliability. For easy installation and smooth operation, make sure to download the comprehensive Installation, User & Maintenance Manual from our website. This manual is available for free, providing valuable instructions and insights to maximize your DS3500 experience.

Share
Download
background image

7914TOC.fm

Draft Document for Review March 28, 2011 12:24 pm

viii

 

IBM System Storage DS3500: Introduction and Implementation Guide

8.2.6  Controller Menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  214
8.2.7  Drive Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  215
8.2.8  Advanced Menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  215
8.2.9  Help Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  215

8.3  Toolbar  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  218

8.3.1  Create new logical drives and arrays  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  218
8.3.2  View diagnostic event log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  218
8.3.3  Monitor Performance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  219
8.3.4  Recover from failures  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  220
8.3.5  Manage enclosure alarm  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  220
8.3.6  Find in tree  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  220
8.3.7  Launch copy manager  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  220

8.4  Status bar  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  221
8.5  Tabs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  222

Chapter 9.  Administration - Logical Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  225
9.1  Logical Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  226
9.2  Working with Unconfigured Capacity  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  228

9.2.1  View Associated Physical Components  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  228
9.2.2  Create Array . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  229

9.3  Working with Arrays  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  231

9.3.1  Locate and View Associated Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  232
9.3.2  Change Ownership and RAID level  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  233
9.3.3  Add Free Capacity (Drive). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  236
9.3.4  Secure Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  237
9.3.5  Delete and Rename  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  237
9.3.6  Replace Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  238

9.4  Working with Free Capacity  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  238

9.4.1  Create Logical Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  239

9.5  Working with Logical Drive  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  244

9.5.1  Change Modification Priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  245
9.5.2  Change Cache Settings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  247
9.5.3  Change Media Scan Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  250
9.5.4  Change Pre-Read Redundancy Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  252
9.5.5  Change Ownership/Preferred Path . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  253
9.5.6  Change Segment Size  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  254
9.5.7  Increase Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  257
9.5.8  Copy Services operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  260
9.5.9  Delete and Rename  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  260

Chapter 10.  Administration - Physical Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  263
10.1  Physical tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  264
10.2  Discover component properties and location  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  265

10.2.1  Show disks type  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  265
10.2.2  View Enclosure Components  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  265
10.2.3  Disk Drive menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  266
10.2.4  Controller menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  267

10.3  Set hot spare drive  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  268
10.4  Failed disk drive replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  272
10.5  Set preferred loop ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  275
10.6  Set remote access  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  276
10.7  Set Ethernet management ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  276

10.7.1  Initial settings for default IP addresses in DS Storage Manager. . . . . . . . . . . .  277

Summary of Contents for DS3500























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DS3500

XenData X1 Installation And User Manual preview
X1
Brand: XenData Pages: 12
A-Link WNAP4G Quick Installaion Manual preview
WNAP4G
Brand: A-Link Pages: 6
JB Systems Scene Master Operation Manual preview
Scene Master
Brand: JB Systems Pages: 24
JB Systems CMX 24 User Manual preview
CMX 24
Brand: JB Systems Pages: 61
U-Line H-3619 Quick Start Manual preview
H-3619
Brand: U-Line Pages: 5
iDirect iQ Desktop+ Installation, Support, And Maintenance Manual preview
iQ Desktop+
Brand: iDirect Pages: 52
ADS-tec StoraXe PowerBooster GSS0608 Manual preview
StoraXe PowerBooster GSS0608
Brand: ADS-tec Pages: 140
i3 International SRX-Pro Server Quick Start Manual preview
SRX-Pro Server
Brand: i3 International Pages: 2
i3 International SAN iS316 User Manual preview
SAN iS316
Brand: i3 International Pages: 89
LaCie 301300U - Ethernet Disk NAS Server User Manual preview
301300U - Ethernet Disk NAS Server
Brand: LaCie Pages: 62
Sans Digital MOBILESTOR MS4UT+(B) Install Manual preview
MOBILESTOR MS4UT+(B)
Brand: Sans Digital Pages: 2
NCR 7702-K260 Kit Instructions preview
7702-K260
Brand: NCR Pages: 10
DIGIWEB Box 7360 Quick Setup Manual preview
Box 7360
Brand: DIGIWEB Pages: 16
Allied Telesis AT-AR3050S Installation Manual preview
AT-AR3050S
Brand: Allied Telesis Pages: 80
Conel LR77 v2 SL User Manual preview
LR77 v2 SL
Brand: Conel Pages: 32
IBM Netfinity Series Installation Instructions Manual preview
Netfinity Series
Brand: IBM Pages: 44
RackSolutions 4Post Installation Instructions Manual preview
4Post
Brand: RackSolutions Pages: 8
Maxtor MaxAttach NAS 4000 Quick Start Manual preview
MaxAttach NAS 4000
Brand: Maxtor Pages: 2

Brands by name

Popular brands

Load more brands