manualshive.com logo in svg

IBM DS3500, Introduction And Implementation Manual

The IBM DS3500 is a powerful data storage solution for businesses, offering high performance and reliability. For easy installation and smooth operation, make sure to download the comprehensive Installation, User & Maintenance Manual from our website. This manual is available for free, providing valuable instructions and insights to maximize your DS3500 experience.

Share
Download
background image

 Contents 

ix

Draft Document for Review March 28, 2011 12:24 pm

7914TOC.fm

10.7.2  Configure Ethernet Management Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  278

10.8  Configure iSCSI Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  279

Chapter 11.  Administration - Mappings Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  281
11.1  Mappings tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
11.2  Defining Host. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283

11.2.1  Adding a new Host to existing Host Group . . . . . . . . . . . . . . . . . . . . . . . . . . . .  291

11.3  Defining Storage Partitioning  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  292
11.4  Defining Host Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  295
11.5  Manage Host Port Identifiers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  297
11.6  Define Additional Mapping  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  298
11.7  View Unassociated Ports  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  300
11.8  Move, Remove and Rename Host  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  300
11.9  Change Host Operating System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  301
11.10  Change and Remove Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  302

Chapter 12.  Administration - Setup tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  305
12.1  Setup tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  306
12.2  Locate Storage Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  306
12.3  Rename Storage Subsystem  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  307
12.4  Set a Storage Subsystem Password. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  307
12.5  Configure iSCSI Host Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  308
12.6  Configure Storage Subsystem  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  309

12.6.1  Automatic configuration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  310
12.6.2  Configure hot spare drives  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  313
12.6.3  Create arrays and logical drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  313

12.7  Map Logical Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  314
12.8  Save Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  314
12.9  Manually Define Hosts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  315
12.10  Configure Ethernet Management Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  316
12.11  View/Enable Premium Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  316
12.12  Manage iSCSI Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  316

Chapter 13.  Administration - iSCSI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  317
13.1  Planning for iSCSI attachment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  318
13.2  iSCSI Configuration summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  319
13.3  Manage iSCSI protocol settings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  320

13.3.1  Target Authentication  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  320
13.3.2  Mutual Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  322
13.3.3  Target Identification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  323
13.3.4  Target Discovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  324

13.4  Configure iSCSI Host Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  325
13.5  View/End iSCSI Sessions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  329
13.6  View iSCSI Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  331
13.7  Defining iSCSI hosts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  333

13.7.1  View Unassociated iSCSI initiators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  333
13.7.2  Defining new iSCSI host . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  334
13.7.3  Manage iSCSI host ports  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  335

Chapter 14.  Administration - Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  337
14.1  The Subsystem Management support tab  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  338
14.2  Gather Support Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  339

14.2.1  Saving the Support Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  340
14.2.2  Support Data Automatic Settings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  342

Summary of Contents for DS3500























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DS3500

F5 VIPRION 2400 Platform Manual preview
VIPRION 2400
Brand: F5 Pages: 72
F-SECURE SENSE Quick Manual preview
SENSE
Brand: F-SECURE Pages: 19
Davey RainBank mkII Installation Instructions Manual preview
RainBank mkII
Brand: Davey Pages: 18
Sun Microsystems Sun Fire V20z Replacing preview
Sun Fire V20z
Brand: Sun Microsystems Pages: 4
Kanguru Q2S-3H-15T User Manual preview
Q2S-3H-15T
Brand: Kanguru Pages: 12
X-Micro IEEE 802.11b User Manual preview
IEEE 802.11b
Brand: X-Micro Pages: 49
Airlink101 AR325W Quick Installation Manual preview
AR325W
Brand: Airlink101 Pages: 13
Valcom VIP-201 Specification preview
VIP-201
Brand: Valcom Pages: 4
Leightronix UltraNEXUS-HD Flex Product Quick Manual preview
UltraNEXUS-HD Flex
Brand: Leightronix Pages: 5
HMS Networks Anybus Communicator ABC4018 User Manual preview
Anybus Communicator ABC4018
Brand: HMS Networks Pages: 64
RackSolutions 4Post Installation Instructions Manual preview
4Post
Brand: RackSolutions Pages: 8
Maxtor MaxAttach NAS 4000 Quick Start Manual preview
MaxAttach NAS 4000
Brand: Maxtor Pages: 2
IBM DBCA-203240 Specifications preview
DBCA-203240
Brand: IBM Pages: 190
AIC HA201-AP User Manual preview
HA201-AP
Brand: AIC Pages: 64
Kontron CP6006-SA User Manual preview
CP6006-SA
Brand: Kontron Pages: 90
3onedata ICPE2600 Series Quick Installation Manual preview
ICPE2600 Series
Brand: 3onedata Pages: 5
Accu ESS R050100 User Manual preview
ESS R050100
Brand: Accu Pages: 44
Dell Force10 MXL Blade Specifications preview
Force10 MXL Blade
Brand: Dell Pages: 2

Brands by name

Popular brands

Load more brands