manualshive.com logo in svg

IBM DS3500, Introduction And Implementation Manual

The IBM DS3500 is a powerful data storage solution for businesses, offering high performance and reliability. For easy installation and smooth operation, make sure to download the comprehensive Installation, User & Maintenance Manual from our website. This manual is available for free, providing valuable instructions and insights to maximize your DS3500 experience.

Share
Download
background image

 Contents 

xi

Draft Document for Review March 28, 2011 12:24 pm

7914TOC.fm

15.3.2  Secure key creation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  458
15.3.3  Enable Disk Security on array. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  465

15.4  Additional secure disk functions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  466

15.4.1  Changing the security key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  466
15.4.2  Save security key file  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  469
15.4.3  Secure erase. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  470
15.4.4  FDE drive status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  471
15.4.5  Hot spare drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  472

15.5  Migrating secure disk arrays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  472

15.5.1  Planning checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  472
15.5.2  Export the array  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  473

15.6  Import secure drive array  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  476

15.6.1  Unlock drives  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  478
15.6.2  Import array. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  479

Chapter 16.  IBM Remote Support Manager for Storage  . . . . . . . . . . . . . . . . . . . . . . .  485
16.1  IBM Remote Support Manager for Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  486

16.1.1  Hardware and software requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  487
16.1.2  DS-RSM Model RS3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  489
16.1.3  Installation choices for RSM for Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  490
16.1.4  How RSM for Storage works. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  491
16.1.5  Notification e-mail and events filtering  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  492
16.1.6  Remote access methods  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  498
16.1.7  RSM management interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  499
16.1.8  RSM security considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  500

16.2  Installing and setting up RSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  502

16.2.1  Installing the host OS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  503
16.2.2  Installing RSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  503
16.2.3  Setting up RSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  503
16.2.4  Configuring SNMP traps in Storage Manager. . . . . . . . . . . . . . . . . . . . . . . . . .  520
16.2.5  Activating RSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  522
16.2.6  Remote access security  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  524
16.2.7  Managing alerts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  529

Chapter 17.  Command-Line Interface(CLI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  533
17.1  How to Use the Command Line Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  535

17.1.1  Usage Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  535

17.2  Running the CLI  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  536

17.2.1  Script Editor  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  536

17.3  General SMcli syntax  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  538
17.4  Adding a storage subsystem to the Storage Manager configuration  . . . . . . . . . . . .  542
17.5  Showing defined subsystems in the Storage Manager configuration . . . . . . . . . . . .  543
17.6  Configuring alerts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  544

17.6.1  Defining the mail server and e-mail address to send out the e-mail alerts . . . .  544
17.6.2  Defining email alert recipients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  544
17.6.3  Deleting e-mail alert recipients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  545
17.6.4  SNMP alert recipients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  546

17.7  Issuing commands to the storage subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  547

17.7.1  Sample command: Save configuration script file  . . . . . . . . . . . . . . . . . . . . . . .  549

17.8  More Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  551

Chapter 18.  Windows SAS configuration guide for IBM BladeCenter . . . . . . . . . . . .  553
18.1  Equipment required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  554
18.2  IBM BladeCenter setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  554

Summary of Contents for DS3500























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DS3500

Barco MatrixPRO-II DVI 16x16 User Manual preview
MatrixPRO-II DVI 16x16
Brand: Barco Pages: 43
Barco matrixpro-II Information Manual preview
matrixpro-II
Brand: Barco Pages: 5
Hanwha WRR-5301 Replacement Manual preview
WRR-5301
Brand: Hanwha Pages: 3
IBM HS12 - BladeCenter - 8028 Service Manual preview
HS12 - BladeCenter - 8028
Brand: IBM Pages: 204
IBM BladeCenter Management Module Installation And User Manual preview
BladeCenter Management Module
Brand: IBM Pages: 184
Davey RainBank mkII Installation Instructions Manual preview
RainBank mkII
Brand: Davey Pages: 18
Sun Microsystems Netra t 1120 Service Manual preview
Netra t 1120
Brand: Sun Microsystems Pages: 148
HPE G2 R8000 3U WW ERM Product End-Of-Life Disassembly Instructions preview
G2 R8000 3U WW ERM
Brand: HPE Pages: 3
eWON 2101CD Installation Manual preview
2101CD
Brand: eWON Pages: 34
Supermicro SUPERSERVER 5018A-MHN4 User Manual preview
SUPERSERVER 5018A-MHN4
Brand: Supermicro Pages: 116
CASARIA 108120 Instructions Manual preview
108120
Brand: CASARIA Pages: 13
Lantronix WP2002000-01 User Manual preview
WP2002000-01
Brand: Lantronix Pages: 75
Behringer B-Control Fader BCF2000 Quick Start Manual preview
B-Control Fader BCF2000
Brand: Behringer Pages: 13
Sollae Systems EZL-200 User Manual preview
EZL-200
Brand: Sollae Systems Pages: 27
InHand IR615-S Series User Manual preview
IR615-S Series
Brand: InHand Pages: 69
NetComm NB3300 Installation And Setup preview
NB3300
Brand: NetComm Pages: 4
Hame 434T User Manual preview
434T
Brand: Hame Pages: 37
AC&T System ETOS-100XP-E04 User Manual preview
ETOS-100XP-E04
Brand: AC&T System Pages: 32

Brands by name

Popular brands

Load more brands