manualshive.com logo in svg

IBM DS3500, Introduction And Implementation Manual

The IBM DS3500 is a powerful data storage solution for businesses, offering high performance and reliability. For easy installation and smooth operation, make sure to download the comprehensive Installation, User & Maintenance Manual from our website. This manual is available for free, providing valuable instructions and insights to maximize your DS3500 experience.

Share
Download
background image

7914TOC.fm

Draft Document for Review March 28, 2011 12:24 pm

xii

 

IBM System Storage DS3500: Introduction and Implementation Guide

18.2.1  Installing Windows Server 2008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  555
18.2.2  HS21 SAS Expansion Cards  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  555
18.2.3  Recording the SAS Expansion Card WWPN  . . . . . . . . . . . . . . . . . . . . . . . . . .  555
18.2.4  HS21 SAS Expansion Card device driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  558
18.2.5  SAS Connectivity Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  558
18.2.6  SAS Connectivity Module firmware update. . . . . . . . . . . . . . . . . . . . . . . . . . . .  559
18.2.7  Configuring the SAS connectivity module . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  562
18.2.8  SAS Connectivity Module zoning  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  563

18.3  Installing DS Storage Manager host software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  565
18.4  Configure the disk space in Windows Server 2008. . . . . . . . . . . . . . . . . . . . . . . . . .  566

Chapter 19.  Microsoft Cluster configuration with DS3500  . . . . . . . . . . . . . . . . . . . . .  571
19.1  Overview of a failover cluster  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  572

19.1.1  Hardware requirements for a two-node failover cluster  . . . . . . . . . . . . . . . . . .  572

19.2  Preparing the environment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  573

19.2.1  SAN Zoning configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  573
19.2.2  DS3500 Storage configuration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  573

19.3  Installing DS Storage Manager host software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  578

19.3.1  Installing the multipath driver  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  578

19.4  Windows Server 2008 Failover Clustering  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  580

19.4.1  Installing the Failover Clustering Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  580
19.4.2  Validate a Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  583
19.4.3  Create a Cluster  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  587
19.4.4  Quorum configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  589
19.4.5  Steps for configuring a two-node file server cluster  . . . . . . . . . . . . . . . . . . . . .  595

Chapter 20.  SuSE Linux configuration guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  603
20.1  DS3500 SAS storage configuration on SLES 11 using RDAC . . . . . . . . . . . . . . . . .  604

20.1.1  Preparing for the installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  604
20.1.2  Installing the RDAC Multipath Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  610
20.1.3  Setting up the DS3500 logical drives and host mapping. . . . . . . . . . . . . . . . . .  611
20.1.4  Scan and verify the storage logical drive  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  612
20.1.5  Configuring RDAC (MPP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  615

20.2  DS3500 iSCSI storage configuration on SLES 11 using RDAC . . . . . . . . . . . . . . . .  616

20.2.1  Preparing for the installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  616
20.2.2  Configuring iSCSI software initiator with YaST . . . . . . . . . . . . . . . . . . . . . . . . .  618
20.2.3  Configuring iSCSI software initiator manually . . . . . . . . . . . . . . . . . . . . . . . . . .  624

20.3  DS3500 FC SAN boot configuration for SLES 11 server using RDAC . . . . . . . . . . .  627

20.3.1  Preparing for the installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  627
20.3.2  SuSE Linux Enterprise 11 installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  633
20.3.3  SuSE Linux final zoning topology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  634

20.4  DS3500 FC storage configuration on SLES 11 using DMM . . . . . . . . . . . . . . . . . . .  635

20.4.1  DMM Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  635
20.4.2  Comparing RDAC(MPP) to DMM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  636
20.4.3  Planning for the installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  636
20.4.4  Installing the DMM multipath driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  637

20.5  Scan and manage the storage logical drive  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  639

Chapter 21.  AIX 6.1 configuration guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  643
21.1  Planning for the installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  644

21.1.1  Zoning considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  645
21.1.2  SAN Boot implementation possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  645
21.1.3  Planning MPIO  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  646

21.2  Configuring MPIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  650

Summary of Contents for DS3500























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DS3500

D-Link DES-1228/ME User Manual preview
DES-1228/ME
Brand: D-Link Pages: 267
NEC Express5800/R310e-E4 User Manual preview
Express5800/R310e-E4
Brand: NEC Pages: 86
NOMACHINE D-811_002-NXS-SAG Administrator'S Manual preview
D-811_002-NXS-SAG
Brand: NOMACHINE Pages: 19
Avaya Virtual Services Platform 7000 Series Troubleshooting Manual preview
Virtual Services Platform 7000 Series
Brand: Avaya Pages: 103
IBM StorVize V7000 Gen2 Quick Installation Manual preview
StorVize V7000 Gen2
Brand: IBM Pages: 188
CAAS Audio Digital Audio Server User Manual & Warranty preview
Digital Audio Server
Brand: CAAS Audio Pages: 23
LaCie Biggest S2S Brochure & Specs preview
Biggest S2S
Brand: LaCie Pages: 2
Blueshark Studio Vertical Modular Paint Storage Instructions Manual preview
Vertical Modular Paint Storage
Brand: Blueshark Studio Pages: 7
IBM IntelliStation R Pro Hardware Maintenance Manual preview
IntelliStation R Pro
Brand: IBM Pages: 194
IBM Eserver 345 Series Option Installation Manual preview
Eserver 345 Series
Brand: IBM Pages: 70
Viking Technology VPFEM4128GSCBMTL Manual preview
VPFEM4128GSCBMTL
Brand: Viking Technology Pages: 36
Sun Oracle SPARC T3-2 Service Manual preview
SPARC T3-2
Brand: Sun Oracle Pages: 222
ADLINK Technology DLAP-201 Series User Manual preview
DLAP-201 Series
Brand: ADLINK Technology Pages: 39
B&B Electronics IASW5P Quick Start Manual preview
IASW5P
Brand: B&B Electronics Pages: 2
Comnet CNGE28FX4TX24MS2 Installation And Operation Manual preview
CNGE28FX4TX24MS2
Brand: Comnet Pages: 154
H3C LS-5100-16P-SI-OVS-H3 Configuration preview
LS-5100-16P-SI-OVS-H3
Brand: H3C Pages: 313
D-Link DSL-245GR Quick Installation Manual preview
DSL-245GR
Brand: D-Link Pages: 52
Dell PowerEdge M630 Owner'S Manual preview
PowerEdge M630
Brand: Dell Pages: 129

Brands by name

Popular brands

Load more brands