manualshive.com logo in svg

IBM DS3500, Introduction And Implementation Manual

The IBM DS3500 is a powerful data storage solution for businesses, offering high performance and reliability. For easy installation and smooth operation, make sure to download the comprehensive Installation, User & Maintenance Manual from our website. This manual is available for free, providing valuable instructions and insights to maximize your DS3500 experience.

Share
Download
background image

7914Admin_Logical.fm

Draft Document for Review March 28, 2011 12:24 pm

252

 

IBM System Storage DS3500: Introduction and Implementation Guide

The Change Media Scan Settings window has two sections. In the first, you can suspend 
media scan or set the scan duration for entire storage subsystem, and in the second, you can 
enable or disable scanning for selected logical drives. You can decide if it will be done with or 
without the redundancy check. 

Suspend media scan

To disable the media scan, select the Suspend media scan check box and click OK. All 
media scan functions will be disabled for all logical drives.

Edit scan duration days

To edit the scan duration, make sure Suspend media scan is unchecked and select the new 
value in the Scan duration box. Click OK to save the changes. 

Logical drive settings 

If the media scan is active, you can enable a redundancy check for individual logical drives: 

1. Highlight (with help of Ctrl or Shift keys) one or more logical drives you want to set. 

2. To enable the media scan, select the Scan selected logical drives check box, choose 

with or without redundancy check, and click OK.

3. The changes will be saved on the storage subsystem, and you are informed when it is 

completed.

9.5.4  Change Pre-Read Redundancy Check

You can use this option to define the capability of the DS3500 Storage Subsystem firmware to 
pre-read logical drive redundancy information and determine if the data of a given logical 
drive is consistent (redundant). This check is done on each read operation on the selected 
logical drive.

A logical drive that has this feature enabled returns read errors if the data is determined to be 
inconsistent by the controller firmware. It happens, for example, if data from one disk of a 
RAID 10 array is readable and mirrored data from a second disk is not readable.

Remember that:

򐂰

You cannot enable this feature for logical drives that do not contain redundancy 
information.

򐂰

You cannot enable this check for high-level logical drives (FlashCopy or Remote Mirror 
target logical drives).

򐂰

You can enable pre-read redundancy check on each logical drive separately.

򐂰

You can enable this check for normal logical drives, and also on FlashCopy base logical 
drives, VolumeCopy source and target drives, FlashCopy repository drives, and Remote 
Mirror source drive.

If a logical drive that is configured with a pre-read check is migrated to a RAID 0 type that 
does not maintain redundancy information, the metadata of the logical drive continues to 
reflect this setting. The read operations from that logical drive ignores pre-read redundancy 
check. If the logical drive is subsequently migrated back to a RAID type that supports 
redundancy, the feature will become active again.

A similar function is provided if the background media scan is set with a redundancy check. 
The Pre-Read Redundancy Check is similar to the Media Scan setting with redundancy check 
enabled (see 9.5.3, “Change Media Scan Settings” on page 250). The main difference is that 

Summary of Contents for DS3500























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DS3500

Makita RF1101 Parts Breakdown preview
RF1101
Brand: Makita Pages: 2
B+B SmartWorx CR10 v2 Start Manual preview
CR10 v2
Brand: B+B SmartWorx Pages: 4
H3C s5800 series Quick Start Manual preview
s5800 series
Brand: H3C Pages: 33
H3C S5500-SI Series Operation Manual preview
S5500-SI Series
Brand: H3C Pages: 1217
3Com MSR 50 Series Configuration Manual preview
MSR 50 Series
Brand: 3Com Pages: 2443
H3C SR6600 Series Installation Manual preview
SR6600 Series
Brand: H3C Pages: 3
H3C UniServer T1100 G3 Operating System Installation Manual preview
UniServer T1100 G3
Brand: H3C Pages: 66
H3C UniServer R6900 G3 User Manual preview
UniServer R6900 G3
Brand: H3C Pages: 214
H3C UniServer R6700 G3 User Manual preview
UniServer R6700 G3
Brand: H3C Pages: 151
H3C UniServer R4900 G5 Installation, Quick Start preview
UniServer R4900 G5
Brand: H3C Pages: 16
H3C SR6616 Installation, Quick Start preview
SR6616
Brand: H3C Pages: 4
Ubee DVW3201B User Manual preview
DVW3201B
Brand: Ubee Pages: 9
Sun Fire X4600 Installation Manual preview
X4600
Brand: Sun Fire Pages: 66
IBM 88631SU - System x3850 - 8863 Installation Manual preview
88631SU - System x3850 - 8863
Brand: IBM Pages: 90
AT&T Nighthawk M6 Pro Let'S Get Started preview
Nighthawk M6 Pro
Brand: AT&T Pages: 2
Supermicro SUPERSERVER 5018D-MHR7N4P User Manual preview
SUPERSERVER 5018D-MHR7N4P
Brand: Supermicro Pages: 126
American Megatrends StorTrends 1312-P Specifications preview
StorTrends 1312-P
Brand: American Megatrends Pages: 2
Velvac Road-iQ Installation Manual preview
Road-iQ
Brand: Velvac Pages: 55

Brands by name

Popular brands

Load more brands