manualshive.com logo in svg

IBM DS3500, Introduction And Implementation Manual

The IBM DS3500 is a powerful data storage solution for businesses, offering high performance and reliability. For easy installation and smooth operation, make sure to download the comprehensive Installation, User & Maintenance Manual from our website. This manual is available for free, providing valuable instructions and insights to maximize your DS3500 experience.

Share
Download
background image

7914DS3KIntro_081410alw.fm

Draft Document for Review March 28, 2011 12:24 pm

28

 

IBM System Storage DS3500: Introduction and Implementation Guide

Storage Manager Agent (SMagent) 

SMagent is an optional component that is only required for in-band management. SMagent is 
installed in the host server and allows the SMclient to communicate with DS3500 across the 
I/O path. At the time of writing, only the FC I/O path is supported for management 
communication. 

Storage Manager Utility (SMutil) 

The Storage Manager Utility package contains the following components: 

򐂰

Hot-add utility

You can use this utility to dynamically add newly created logical drives to the operating 
system running in the host without having to reboot the host server. This utility is available 
for Windows only.

򐂰

SMdevices utility

This utility can be used to associate logical drives to device names in the operating 
system. It is installed with both the Windows and Linux package.

򐂰

SMrepassist utility

SMrepassist is a Windows utility used with FlashCopy and VolumeCopy. The utility allows 
you to flush cached data prior to creating a FlashCopy/VolumeCopy image. In other 
operating systems, you need to unmount the file system. SMrepassist does not exist in the 
Linux package.

SMutil is a required package in the host server for ease of troubleshooting and problem 
analysis. With these utilities there are may quick changes that can be implemented as well as 
a great deal of detail on the current configuration settings and their impacts.

Multipath driver support 

We recommend installing two HBAs in the host servers and using the dual controller DS3500 
subsystems. This provides the ability to create completely redundant paths to the host 
server’s storage therefore improving the availability through multiple I/O paths to the 
controllers and full storage redundancy out the backend to the disks. However, host dual path 
configurations can only work properly if you install the appropriate multipath driver for your 
particular operating system into the host server. 

The IBM System Storage DS Storage Manager Software and Host Kit for Windows includes 
multipath support, based on the Microsoft MPIO framework. The IBM System Storage DS 
Storage Manager Software and Host Kit for Linux does not include any multipath support. 
RDAC for Linux is available as a separate open source package called MPP. For Solaris there 
is a version of DMP which can be implemented for multi-path support. And in AIX there is an 
MPIO driver that is available to support the DS family of storage subsystems. All of these 
drivers require special configurations and setups to be followed when implementing them and 
desiring them to function in the expected manner. A simple parameter setting can be the 
difference between a successful failover to an alternate path, and an application outage.

Java Access Bridge

This is included in the Windows Storage Manager package only. Java Access Bridge for 
Microsoft Windows makes it possible for Windows based assistive technology to access and 
interact with the application.

Summary of Contents for DS3500























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DS3500

F5 VIPRION 2400 Platform Manual preview
VIPRION 2400
Brand: F5 Pages: 72
F-SECURE SENSE Quick Manual preview
SENSE
Brand: F-SECURE Pages: 19
IBM 990 Reference Manual preview
990
Brand: IBM Pages: 88
M-system AB2 Instruction Manual preview
AB2
Brand: M-system Pages: 3
Omega Solid Stainless Steel Shelving Assembly Instructions preview
Solid Stainless Steel Shelving
Brand: Omega Pages: 2
H3C S12500R-2L Installation Manual preview
S12500R-2L
Brand: H3C Pages: 77
GDC SX-2000A Series User Manual preview
SX-2000A Series
Brand: GDC Pages: 185
YearGoo 2.5” Solid State Drive Manual preview
2.5” Solid State Drive
Brand: YearGoo Pages: 6
LaCie 301273 User Manual preview
301273
Brand: LaCie Pages: 27
Icy Box IB-RD3262-USE2 User Manual preview
IB-RD3262-USE2
Brand: Icy Box Pages: 36
Ozenda AR4505GW Instruction Manual preview
AR4505GW
Brand: Ozenda Pages: 116
LaCie 301300U - Ethernet Disk NAS Server User Manual preview
301300U - Ethernet Disk NAS Server
Brand: LaCie Pages: 62
Hama 104389 Operating Instructions Manual preview
104389
Brand: Hama Pages: 8
ANTAIRA LMP-1202G-SFP Series Hardware Manual preview
LMP-1202G-SFP Series
Brand: ANTAIRA Pages: 19
Genexis FiberTwist G6426 Installation Manual preview
FiberTwist G6426
Brand: Genexis Pages: 9
BELINEA o.center User Manual preview
o.center
Brand: BELINEA Pages: 53
IBM 9131-52A Quick Start Manual preview
9131-52A
Brand: IBM Pages: 16
WiebeTech Forensic ComboDock FCDv6 Manual preview
Forensic ComboDock FCDv6
Brand: WiebeTech Pages: 20

Brands by name

Popular brands

Load more brands