background image

 52

IBM® xSeries 150: Installation Guide

 

 

12. EXPORT RESTRICTIONS. You acknowledge that the Product is of U.S. origin. 

You agree to comply with all applicable international and national laws that apply 
to the Product, including the U.S. Export Administration Regulations, as well as 
end-user, end-use and destination restrictions issued by U.S. and other 
governments. For additional information, see 
http://www.microsoft.com/exporting/.

13. PRODUCT SUPPORT. Product support for the Product is not provided by MS, 

Microsoft Corporation or their affiliates or subsidiaries. For product support, 
please refer to Manufacturer’s support number provided in the documentation 
for the xSeries 150.

14. NOTE ON JAVA SUPPORT. THE PRODUCT MAY CONTAIN SUPPORT FOR 

PROGRAMS WRITTEN IN JAVA. JAVA TECHNOLOGY IS NOT FAULT 
TOLERANT AND IS NOT DESIGNED, MANUFACTURED, OR INTENDED 
FOR USE OR RESALE AS ON-LINE CONTROL EQUIPMENT IN HAZARDOUS 
ENVIRONMENTS REQUIRING FAIL-SAFE PERFORMANCE, SUCH AS IN 
THE OPERATION OF NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR 
COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, DIRECT LIFE 
SUPPORT MACHINES, OR WEAPONS SYSTEMS, IN WHICH THE FAILURE 
OF JAVA TECHNOLOGY COULD LEAD DIRECTLY TO DEATH, PERSONAL 
INJURY, OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE. Sun 
Microsystems, Inc. has contractually obligated Microsoft Corporation to make 
this disclaimer.

15. Questions? Should you have any questions concerning this EULA, or if you 

desire to contact Manufacturer for any other reason, please refer to the address 
provided in the documentation for the xSeries 150.

FOR THE LIMITED WARRANTIES AND SPECIAL PROVISIONS PERTAINING 
TO YOUR PARTICULAR JURISDICTION, PLEASE REFER TO THE 
WARRANTIES INCLUDED BELOW OR PROVIDED WITH THE SOFTWARE 
PRODUCT PRINTED MATERIALS.

End-User License Agreement:  Microsoft Windows Services for NetWare 
Version 5.0

IMPORTANT -- READ CAREFULLY: This End-User License Agreement ("EULA") 
is a legal agreement between you (either an individual or a single entity) and the 
manufacturer ("Manufacturer") of the computer system ("COMPUTER") with 
which you acquired the Microsoft software product identified above ("Product"). If 
the Product is not accompanied by a new COMPUTER , you may not use or copy 
the Product.  The Product may include computer software, associated media, 
printed materials, and "online" or electronic documentation.  This EULA grants the 
end-user license rights ONLY if the Product is genuine.  Any software provided 
along with the Product that is associated with a separate end-user license 
agreement is licensed to you under the terms of that license agreement.  By 
installing, copying, downloading, accessing or otherwise using the Product, you 
agree to be bound by the terms of this EULA.  If you do not agree to the terms of 
this EULA, Manufacturer and Microsoft Licensing, Inc. ("MS") are unwilling to 
license the Product to you.  In such event, you may not use or copy the Product, and 
you should promptly contact Manufacturer for instructions on return of the unused 
Product in accordance with Manufacturer’s return policies.

The Product is protected by copyright laws and international copyright treaties, as 
well as other intellectual property laws and treaties.  MS, Microsoft Corporation 
and/or its suppliers own the title, copyright, and other intellectual property rights 
in the Product.  The Product is licensed, not sold.

 

1. GRANT OF LICENSE. This EULA grants you the following rights to the Product 

provided you comply with all its terms and conditions: 

Summary of Contents for eServer 150 xSeries













































































Reviews: