background image

 viii

IBM xSeries 232: Installation Guide

 

Statement 2

CAUTION:

When replacing the lithium battery, use only IBM Part Number 33F8354 or an 
equivalent type battery recommended by the manufacturer.  If your system 
has a module containing a lithium battery, replace it only with the same 
module type made by the same manufacturer.  The battery contains lithium 
and can explode if not properly used, handled, or disposed of.

Do not:

Throw or immerse into water.

Heat to more than 100 C (212 F)

Repair or disassemble

Dispose of the battery as required by local ordinances or regulations.

Statement 3

CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or 
transmitters) are installed, note the following: 

Do not remove the covers.  Removing the covers of the laser product 
could result in exposure to hazardous laser radiation.  There are no 
serviceable parts inside the device.

Use of controls or adjustments or performance of procedures other than 
those specified herein might result in hazardous radiation exposure.

Class 1 Laser Product
Laser Klasse 1
Laser Klass 1
Luokan 1 Laserlaite
Appareil A Laser de Classe 1

`

Summary of Contents for eServer 232 xSeries





































































Reviews: